Guide d'implémentation du GT Standards et Interopérabilité pour les EDS
0.1.0 - ci-build France flag

Guide d'implémentation du GT Standards et Interopérabilité pour les EDS - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: EDSClaimRSS - Detailed Descriptions

Draft as of 2025-01-23

Definitions for the EDSClaimRSS resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Claim
Definition

A provider issued list of professional services and products which have been provided, or are to be provided, to a patient which is sent to an insurer for reimbursement.

ShortClaim, Pre-determination or Pre-authorization
Comments

The Claim resource fulfills three information request requirements: Claim - a request for adjudication for reimbursement for products and/or services provided; Preauthorization - a request to authorize the future provision of products and/or services including an anticipated adjudication; and, Predetermination - a request for a non-bind adjudication of possible future products and/or services.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesAdjudication Request, Preauthorization Request, Predetermination Request
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Claim.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Claim.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Claim.status
Definition

The status of the resource instance.

Shortactive | cancelled | draft | entered-in-error
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from FinancialResourceStatusCodeshttp://hl7.org/fhir/ValueSet/fm-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/fm-status|4.0.1)

A code specifying the state of the resource instance.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Claim.type
Definition

The category of claim, e.g. oral, pharmacy, vision, institutional, professional.

ShortChamp du PMSI concerné.Category or discipline
Comments

The majority of jurisdictions use: oral, pharmacy, vision, professional and institutional, or variants on those terms, as the general styles of claims. The valueset is extensible to accommodate other jurisdictional requirements.

Control1..1
BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from ValueSet des type fr des claimshttp://hl7.org/fhir/ValueSet/claim-type
(required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/FrClaimType)
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Claim type determine the general sets of business rules applied for information requirements and adjudication.

Pattern Value{
  "coding" : [{
    "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/FrClaimType",
    "code" : "PMSIMCO"
  }]
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Claim.use
Definition

A code to indicate whether the nature of the request is: to request adjudication of products and services previously rendered; or requesting authorization and adjudication for provision in the future; or requesting the non-binding adjudication of the listed products and services which could be provided in the future.

Shortclaim | preauthorization | predetermination
Control1..1
BindingThe codes SHALL be taken from Usehttp://hl7.org/fhir/ValueSet/claim-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/claim-use|4.0.1)

The purpose of the Claim: predetermination, preauthorization, claim.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This element is required to understand the nature of the request for adjudication.

Pattern Valueclaim
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Claim.patient
Definition

The party to whom the professional services and/or products have been supplied or are being considered and for whom actual or forecast reimbursement is sought.

ShortThe recipient of the products and services
Control1..1
TypeReference(Patient, Patient)
Is Modifierfalse
Summarytrue
Requirements

The patient must be supplied to the insurer so that confirmation of coverage and service history may be considered as part of the authorization and/or adjudiction.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Claim.billablePeriod
Definition

The period for which charges are being submitted.

ShortRelevant time frame for the claim
Comments

Typically this would be today or in the past for a claim, and today or in the future for preauthorizations and predeterminations. Typically line item dates of service should fall within the billing period if one is specified.

Control0..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

A number jurisdictions required the submission of the billing period when submitting claims for example for hospital stays or long-term care.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Claim.billablePeriod.start
Definition

The start of the period. The boundary is inclusive.

Shortdate d'entrée dans la première unité médicale visitéeStarting time with inclusive boundary
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Claim.billablePeriod.end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

Shortdate de sortie de la dernière unité médicale visitéeEnd time with inclusive boundary, if not ongoing
Comments

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Claim.created
Definition

The date this resource was created.

ShortResource creation date
Comments

This field is independent of the date of creation of the resource as it may reflect the creation date of a source document prior to digitization. Typically for claims all services must be completed as of this date.

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to record a timestamp for use by both the recipient and the issuer.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Claim.provider
Definition

The provider which is responsible for the claim, predetermination or preauthorization.

ShortEntité juridique émettriceParty responsible for the claim
Comments

Typically this field would be 1..1 where this party is responsible for the claim but not necessarily professionally responsible for the provision of the individual products and services listed below.

Control1..1
TypeReference(Practitioner, PractitionerRole, Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Claim.priority
Definition

The provider-required urgency of processing the request. Typical values include: stat, routine deferred.

ShortDesired processing ugency
Comments

If a claim processor is unable to complete the processing as per the priority then they should generate and error and not process the request.

Control1..1
BindingFor example codes, see ProcessPriorityCodeshttp://hl7.org/fhir/ValueSet/process-priority
(example to http://hl7.org/fhir/ValueSet/process-priority)

The timeliness with which processing is required: stat, normal, deferred.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

The provider may need to indicate their processing requirements so that the processor can indicate if they are unable to comply.

Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/processpriority",
    "code" : "normal"
  }]
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Claim.supportingInfo
Definition

Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

ShortsupportingInfoSupporting information
Comments

Often there are multiple jurisdiction specific valuesets which are required.

Control20..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Claim.supportingInfo. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ code.coding.code
  • value @ code.coding.system
  • 28. Claim.supportingInfo.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Claim.supportingInfo.sequence
    Definition

    A number to uniquely identify supporting information entries.

    ShortInformation instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Claim.supportingInfo.category
    Definition

    The general class of the information supplied: information; exception; accident, employment; onset, etc.

    ShortClassification of the supplied information
    Comments

    This may contain a category for the local bill type codes.

    Control1..1
    BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory
    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

    The valuset used for additional information category codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Claim.supportingInfo:ModeIn
    Slice NameModeIn
    Definition

    Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

    ShortSupporting information
    Comments

    Often there are multiple jurisdiction specific valuesets which are required.

    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

    Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Claim.supportingInfo:ModeIn.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    38. Claim.supportingInfo:ModeIn.sequence
    Definition

    A number to uniquely identify supporting information entries.

    ShortInformation instance identifier
    Control1..1
    TypepositiveInt
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Requirements

    Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Claim.supportingInfo:ModeIn.category
    Definition

    The general class of the information supplied: information; exception; accident, employment; onset, etc.

    ShortClassification of the supplied information
    Comments

    This may contain a category for the local bill type codes.

    Control1..1
    BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory
    (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

    The valuset used for additional information category codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

    Fixed Value{
      "coding" : [{
        "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/FrClaimSupInfoCategoryPMSIMCO",
        "code" : "RUM"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Claim.supportingInfo:ModeIn.code
    Definition

    System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

    ShortType of information
    Control0..1
    BindingFor example codes, see ExceptionCodeshttp://hl7.org/fhir/ValueSet/claim-exception
    (example to http://hl7.org/fhir/ValueSet/claim-exception)

    The valuset used for additional information codes.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Requirements

    Required to identify the kind of additional information.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Claim.supportingInfo:ModeIn.code.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Claim.supportingInfo.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ code
    • value @ system
    • 46. Claim.supportingInfo:ModeIn.code.coding:ModeInCode
      Slice NameModeInCode
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..1*
      TypeCoding
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      48. Claim.supportingInfo:ModeIn.code.coding:ModeInCode.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/FrClaimMode
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      50. Claim.supportingInfo:ModeIn.code.coding:ModeInCode.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      ShortSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed Value0
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      52. Claim.supportingInfo:ModeIn.value[x]
      Definition

      Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

      Shortvaleur du mode d'entréeData to be provided
      Comments

      Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

      Control0..1
      Typestring, boolean, Reference(Resource), Quantity, Attachment
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      To convey the data content to be provided when the information is more than a simple code or period.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      54. Claim.supportingInfo:ModeOut
      Slice NameModeOut
      Definition

      Additional information codes regarding exceptions, special considerations, the condition, situation, prior or concurrent issues.

      ShortSupporting information
      Comments

      Often there are multiple jurisdiction specific valuesets which are required.

      Control10..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Typically these information codes are required to support the services rendered or the adjudication of the services rendered.

      Alternate NamesAttachments Exception Codes Occurrence Codes Value codes
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      56. Claim.supportingInfo:ModeOut.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      58. Claim.supportingInfo:ModeOut.sequence
      Definition

      A number to uniquely identify supporting information entries.

      ShortInformation instance identifier
      Control1..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Requirements

      Necessary to maintain the order of the supporting information items and provide a mechanism to link to claim details.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      60. Claim.supportingInfo:ModeOut.category
      Definition

      The general class of the information supplied: information; exception; accident, employment; onset, etc.

      ShortClassification of the supplied information
      Comments

      This may contain a category for the local bill type codes.

      Control1..1
      BindingFor example codes, see ClaimInformationCategoryCodeshttp://hl7.org/fhir/ValueSet/claim-informationcategory
      (example to http://hl7.org/fhir/ValueSet/claim-informationcategory)

      The valuset used for additional information category codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required to group or associate information items with common characteristics. For example: admission information or prior treatments.

      Fixed Value{
        "coding" : [{
          "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/FrClaimSupInfoCategoryPMSIMCO",
          "code" : "RUM"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. Claim.supportingInfo:ModeOut.code
      Definition

      System and code pertaining to the specific information regarding special conditions relating to the setting, treatment or patient for which care is sought.

      ShortType of information
      Control0..1
      BindingFor example codes, see ExceptionCodeshttp://hl7.org/fhir/ValueSet/claim-exception
      (example to http://hl7.org/fhir/ValueSet/claim-exception)

      The valuset used for additional information codes.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Required to identify the kind of additional information.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Claim.supportingInfo:ModeOut.code.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Claim.supportingInfo.code.coding. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ code
      • value @ system
      • 66. Claim.supportingInfo:ModeOut.code.coding:ModeOutCode
        Slice NameModeOutCode
        Definition

        A reference to a code defined by a terminology system.

        ShortCode defined by a terminology system
        Comments

        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

        Control10..1*
        TypeCoding
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Allows for alternative encodings within a code system, and translations to other code systems.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Claim.supportingInfo:ModeOut.code.coding:ModeOutCode.system
        Definition

        The identification of the code system that defines the meaning of the symbol in the code.

        ShortIdentity of the terminology system
        Comments

        The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be unambiguous about the source of the definition of the symbol.

        Fixed Valuehttps://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/FrClaimMode
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. Claim.supportingInfo:ModeOut.code.coding:ModeOutCode.code
        Definition

        A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

        ShortSymbol in syntax defined by the system
        Control10..1
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to refer to a particular code in the system.

        Fixed Value1
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. Claim.supportingInfo:ModeOut.value[x]
        Definition

        Additional data or information such as resources, documents, images etc. including references to the data or the actual inclusion of the data.

        Shortvaleur du mode de sortieData to be provided
        Comments

        Could be used to provide references to other resources, document. For example could contain a PDF in an Attachment of the Police Report for an Accident.

        Control0..1
        Typestring, boolean, Reference(Resource), Quantity, Attachment
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summaryfalse
        Requirements

        To convey the data content to be provided when the information is more than a simple code or period.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Claim.diagnosis
        Definition

        Information about diagnoses relevant to the claim items.

        ShortPertinent diagnosis information
        Control10..*
        TypeBackboneElement
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        Required for the adjudication by provided context for the services and product listed.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Claim.diagnosis. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ type
        • 76. Claim.diagnosis.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          78. Claim.diagnosis.sequence
          Definition

          A number to uniquely identify diagnosis entries.

          ShortDiagnosis instance identifier
          Comments

          Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. Claim.diagnosis.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control1..1
          BindingFor example codes, see ICD-10Codeshttp://hl7.org/fhir/ValueSet/icd-10
          (example to http://hl7.org/fhir/ValueSet/icd-10)

          Example ICD10 Diagnostic codes.

          TypeChoice of: CodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          82. Claim.diagnosis:dp
          Slice Namedp
          Definition

          Information about diagnoses relevant to the claim items.

          ShortPertinent diagnosis information
          Control10..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Required for the adjudication by provided context for the services and product listed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          84. Claim.diagnosis:dp.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          86. Claim.diagnosis:dp.sequence
          Definition

          A number to uniquely identify diagnosis entries.

          ShortDiagnosis instance identifier
          Comments

          Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          88. Claim.diagnosis:dp.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control1..1
          BindingThe codes SHALL be taken from For example codes, see Liste des diagnostiques CIM-10 acceptable en DP pour les PMSI MCO et HADhttp://hl7.org/fhir/ValueSet/icd-10
          (required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/CIM10PMSIDP)
          TypeCodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          90. Claim.diagnosis:dp.type
          Definition

          When the condition was observed or the relative ranking.

          ShortTiming or nature of the diagnosis
          Comments

          For example: admitting, primary, secondary, discharge.

          Control10..*
          BindingFor example codes, see ExampleDiagnosisTypeCodeshttp://hl7.org/fhir/ValueSet/ex-diagnosistype
          (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

          The type of the diagnosis: admitting, principal, discharge.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Often required to capture a particular diagnosis, for example: primary or discharge.

          Fixed Value{
            "coding" : [{
              "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/PMSIMCODiagType",
              "code" : "DP"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          92. Claim.diagnosis:dr
          Slice Namedr
          Definition

          Information about diagnoses relevant to the claim items.

          ShortPertinent diagnosis information
          Control0..1*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Required for the adjudication by provided context for the services and product listed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          94. Claim.diagnosis:dr.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          96. Claim.diagnosis:dr.sequence
          Definition

          A number to uniquely identify diagnosis entries.

          ShortDiagnosis instance identifier
          Comments

          Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          98. Claim.diagnosis:dr.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control1..1
          BindingThe codes SHALL be taken from For example codes, see Liste des diagnostiques CIM-10 acceptable en DR pour les PMSI MCO et HADhttp://hl7.org/fhir/ValueSet/icd-10
          (required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/CIM10PMSIDR)
          TypeCodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          100. Claim.diagnosis:dr.type
          Definition

          When the condition was observed or the relative ranking.

          ShortTiming or nature of the diagnosis
          Comments

          For example: admitting, primary, secondary, discharge.

          Control10..*
          BindingFor example codes, see ExampleDiagnosisTypeCodeshttp://hl7.org/fhir/ValueSet/ex-diagnosistype
          (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

          The type of the diagnosis: admitting, principal, discharge.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Often required to capture a particular diagnosis, for example: primary or discharge.

          Fixed Value{
            "coding" : [{
              "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/PMSIMCODiagType",
              "code" : "DR"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          102. Claim.diagnosis:da
          Slice Nameda
          Definition

          Information about diagnoses relevant to the claim items.

          ShortPertinent diagnosis information
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Required for the adjudication by provided context for the services and product listed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          104. Claim.diagnosis:da.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          106. Claim.diagnosis:da.sequence
          Definition

          A number to uniquely identify diagnosis entries.

          ShortDiagnosis instance identifier
          Comments

          Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          108. Claim.diagnosis:da.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control1..1
          BindingThe codes SHALL be taken from For example codes, see Liste des diagnostiques CIM-10 acceptable en DA pour les PMSI MCO et HADhttp://hl7.org/fhir/ValueSet/icd-10
          (required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/CIM10PMSIDA)
          TypeCodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          110. Claim.diagnosis:da.type
          Definition

          When the condition was observed or the relative ranking.

          ShortTiming or nature of the diagnosis
          Comments

          For example: admitting, primary, secondary, discharge.

          Control10..*
          BindingFor example codes, see ExampleDiagnosisTypeCodeshttp://hl7.org/fhir/ValueSet/ex-diagnosistype
          (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

          The type of the diagnosis: admitting, principal, discharge.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Often required to capture a particular diagnosis, for example: primary or discharge.

          Fixed Value{
            "coding" : [{
              "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/PMSIMCODiagType",
              "code" : "DA"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          112. Claim.diagnosis:dad
          Slice Namedad
          Definition

          Information about diagnoses relevant to the claim items.

          ShortPertinent diagnosis information
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Required for the adjudication by provided context for the services and product listed.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          114. Claim.diagnosis:dad.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          116. Claim.diagnosis:dad.sequence
          Definition

          A number to uniquely identify diagnosis entries.

          ShortDiagnosis instance identifier
          Comments

          Diagnosis are presented in list order to their expected importance: primary, secondary, etc.

          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to maintain the order of the diagnosis items and provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          118. Claim.diagnosis:dad.diagnosis[x]
          Definition

          The nature of illness or problem in a coded form or as a reference to an external defined Condition.

          ShortNature of illness or problem
          Control1..1
          BindingThe codes SHALL be taken from For example codes, see Liste des diagnostiques CIM-10 pour le PMSIhttp://hl7.org/fhir/ValueSet/icd-10
          (required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/CIM10PMSI)
          TypeCodeableConcept, Reference(Condition)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          Provides health context for the evaluation of the products and/or services.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          120. Claim.diagnosis:dad.type
          Definition

          When the condition was observed or the relative ranking.

          ShortTiming or nature of the diagnosis
          Comments

          For example: admitting, primary, secondary, discharge.

          Control10..*
          BindingFor example codes, see ExampleDiagnosisTypeCodeshttp://hl7.org/fhir/ValueSet/ex-diagnosistype
          (example to http://hl7.org/fhir/ValueSet/ex-diagnosistype)

          The type of the diagnosis: admitting, principal, discharge.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Requirements

          Often required to capture a particular diagnosis, for example: primary or discharge.

          Fixed Value{
            "coding" : [{
              "system" : "https://interop.esante.gouv.fr/ig/fhir/eds/CodeSystem/PMSIMCODiagType",
              "code" : "DAD"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          122. Claim.procedure
          Definition

          Procedures performed on the patient relevant to the billing items with the claim.

          ShortClinical procedures performed
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          The specific clinical invention are sometimes required to be provided to justify billing a greater than customary amount for a service.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          124. Claim.procedure.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          126. Claim.procedure.sequence
          Definition

          A number to uniquely identify procedure entries.

          ShortProcedure instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Necessary to provide a mechanism to link to claim details.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          128. Claim.procedure.procedure[x]
          Definition

          The code or reference to a Procedure resource which identifies the clinical intervention performed.

          ShortSpecific clinical procedure
          Control1..1
          BindingThe codes SHALL be taken from For example codes, see Actes CCAM pour le PMSIhttp://hl7.org/fhir/ValueSet/icd-10-procedures
          (required to https://interop.esante.gouv.fr/ig/fhir/eds/ValueSet/CCAM)
          TypeCodeableConcept, Reference(Procedure)
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summaryfalse
          Requirements

          This identifies the actual clinical procedure.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          130. Claim.insurance
          Definition

          Financial instruments for reimbursement for the health care products and services specified on the claim.

          ShortPatient insurance information
          Comments

          All insurance coverages for the patient which may be applicable for reimbursement, of the products and services listed in the claim, are typically provided in the claim to allow insurers to confirm the ordering of the insurance coverages relative to local 'coordination of benefit' rules. One coverage (and only one) with 'focal=true' is to be used in the adjudication of this claim. Coverages appearing before the focal Coverage in the list, and where 'Coverage.subrogation=false', should provide a reference to the ClaimResponse containing the adjudication results of the prior claim.

          Control1..*
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Requirements

          At least one insurer is required for a claim to be a claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          132. Claim.insurance.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          134. Claim.insurance.sequence
          Definition

          A number to uniquely identify insurance entries and provide a sequence of coverages to convey coordination of benefit order.

          ShortInsurance instance identifier
          Control1..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          To maintain order of the coverages.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          136. Claim.insurance.focal
          Definition

          A flag to indicate that this Coverage is to be used for adjudication of this claim when set to true.

          ShortCoverage to be used for adjudication
          Comments

          A patient may (will) have multiple insurance policies which provide reimbursement for healthcare services and products. For example a person may also be covered by their spouse's policy and both appear in the list (and may be from the same insurer). This flag will be set to true for only one of the listed policies and that policy will be used for adjudicating this claim. Other claims would be created to request adjudication against the other listed policies.

          Control1..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          To identify which coverage in the list is being used to adjudicate this claim.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          138. Claim.insurance.coverage
          Definition

          Reference to the insurance card level information contained in the Coverage resource. The coverage issuing insurer will use these details to locate the patient's actual coverage within the insurer's information system.

          ShortInsurance information
          Control1..1
          TypeReference(Coverage)
          Is Modifierfalse
          Summarytrue
          Requirements

          Required to allow the adjudicator to locate the correct policy and history within their information system.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))