Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social
0.6.0 - ci-build

Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social - Local Development build (v0.6.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

## Resource Profile: RORTask - Detailed Descriptions

Draft as of 2025-07-28

Definitions for the ror-task resource profile.

- Differential Elements Table
- Key Elements Table
- Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Task
2. Task.identifier
Short | Identifiant de l'anomalie
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1
Must Support | true
4. Task.partOf
Type | Reference(Task, RORTask)
6. Task.status
Must Support | true
8. Task.businessStatus
Short | Statut métier de traitement de l'anomalie
Control | 1..?
Binding | The codes SHALL be taken from JDV_J244_StatutMetierAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR` )
Must Support | true
10. Task.code
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, Exhaustivité
Control | 1..?
Binding | The codes SHALL be taken from JDV_J241_ThematiqueAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR` )
Must Support | true
12. Task.description
Short | Description de l'anomalie
Must Support | true
14. Task.focus
Short | référence vers la ressources en anomalie
Control | 1..?
Must Support | true
16. Task.executionPeriod
18. Task.executionPeriod.start
Short | Date d'envoi au destinataire du traitement de l'anomalie
Must Support | true
20. Task.executionPeriod.end
Short | Date de fin de traitement de l'anomalie par le destinataire
Must Support | true
22. Task.authoredOn
Short | Date création de l'anomalie
Control | 1..?
Must Support | true
24. Task.lastModified
Short | Date de dernière modification
Control | 1..?
Must Support | true
26. Task.requester
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
28. Task.owner
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
30. Task.location
Type | Reference(Location, RORLocation)
32. Task.reasonCode
Short | Type d'action proposée en réponse
Control | 1..?
Binding | The codes SHALL be taken from JDV_J242_ActionAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR` )
Must Support | true
34. Task.restriction
36. Task.restriction.recipient
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole)
38. Task.input
Short | Eléments en entrée pour définir l'anomalie
Control | 1..?
Must Support | true
Slicing | This element introduces a set of slices on `Task.input`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
40. Task.input:ruleErrorId
Nom de la slice | ruleErrorId
Short | Identifiant de la règle à l'origine de l'anomalie
Control | 0..1
Must Support | true
42. Task.input:ruleErrorId.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "ruleErrorId" }] }`
44. Task.input:ruleErrorId.value[x]
Type | string
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
46. Task.input:errorValue
Nom de la slice | errorValue
Short | donnée erronée
Control | 0..*
Must Support | true
48. Task.input:errorValue.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "errorValue" }] }`
50. Task.input:proposedValue
Nom de la slice | proposedValue
Short | nouvelle valeur proposée
Control | 0..*
Must Support | true
52. Task.input:proposedValue.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "proposedValue" }] }`
54. Task.input:pathElementError
Nom de la slice | pathElementError
Short | élément en erreur dans la ressource
Control | 0..1
Must Support | true
56. Task.input:pathElementError.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "pathElementError" }] }`
58. Task.input:pathElementError.value[x]
Type | Expression
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
60. Task.input:systemRequester
Nom de la slice | systemRequester
Short | système déclarant l'anomalie
Control | 1..1
Must Support | true
62. Task.input:systemRequester.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "systemRequester" }] }`
64. Task.input:systemRequester.value[x]
Type | string
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
66. Task.input:identifierRequester
Nom de la slice | identifierRequester
Short | Identifiant du déclarant de l'anomalie
Control | 0..1
Must Support | true
68. Task.input:identifierRequester.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "identifierRequester" }] }`
70. Task.input:identifierRequester.value[x]
Type | Identifier
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
72. Task.output
Short | Eléments en sortie concerant le traitement de l'anomalie
Slicing | This element introduces a set of slices on `Task.output`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
74. Task.output:newValue
Nom de la slice | newValue
Short | Valeur corrigée
Control | 0..*
Must Support | true
76. Task.output:newValue.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "newValue" }] }`
78. Task.output:identifierAnalyst
Nom de la slice | identifierAnalyst
Short | identifiant du destinataire du traitement de la demande
Control | 0..1
Must Support | true
80. Task.output:identifierAnalyst.type
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "identifierAnalyst" }] }`
82. Task.output:identifierAnalyst.value[x]
Type | Identifier
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]

Guidance on how to interpret the contents of this table can be foundhere

0. Task
Définition | A task to be performed.
Short | A task to be performed
Control | 0..*
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) inv-1: Last modified date must be greater than or equal to authored-on date. (lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn)
2. Task.implicitRules
Définition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Commentaires | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Task.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard Status | Normative (from Trial Use)
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing | This element introduces a set of slices on `Task.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Task.identifier
Définition | The business identifier for this task.
Short | Identifiant de l'anomalieTask Instance Identifier
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1* This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Task.partOf
Définition | Task that this particular task is part of.
Short | Composite task
Commentaires | This should usually be 0..1.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Task, RORTask)
Résumé | true
Requirements | Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
10. Task.status
Définition | The current status of the task.
Short | draft | requested | received | accepted | +
Commentaires | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from TaskStatus http://hl7.org/fhir/ValueSet/task-status|4.0.1 (required to `http://hl7.org/fhir/ValueSet/task-status|4.0.1` ) The current status of the task.
Type | code
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Requirements | These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Task.businessStatus
Définition | Contains business-specific nuances of the business state.
Short | Statut métier de traitement de l'anomalieE.g. "Specimen collected", "IV prepped"
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 10..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from For example codes, see JDV_J244_StatutMetierAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Résumé | true
Requirements | There's often a need to track substates of a task - this is often variable by specific workflow implementation.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Task.intent
Définition | Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.
Short | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Commentaires | This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances. In most cases, Tasks will have an intent of "order".
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from TaskIntent http://hl7.org/fhir/ValueSet/task-intent|4.0.1 (required to `http://hl7.org/fhir/ValueSet/task-intent|4.0.1` ) Distinguishes whether the task is a proposal, plan or full order.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Task.code
Définition | A name or code (or both) briefly describing what the task involves.
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, ExhaustivitéTask Type
Commentaires | The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.
Control | 10..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from For example codes, see JDV_J241_ThematiqueAnomalie_ROR http://hl7.org/fhir/ValueSet/task-code (required to `https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Task.description
Définition | A free-text description of what is to be performed.
Short | Description de l'anomalieHuman-readable explanation of task
Commentaires | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Task.focus
Définition | The request being actioned or the resource being manipulated by this task.
Short | référence vers la ressources en anomalieWhat task is acting on
Commentaires | If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).
Control | 10..1 This element is affected by the following invariants: ele-1
Type | Reference(Resource)
Must Support | true
Résumé | true
Requirements | Used to identify the thing to be done.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
22. Task.executionPeriod
Définition | Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).
Short | Start and end time of execution
Commentaires | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) per-1: If present, start SHALL have a lower value than end (start.hasValue().not() or end.hasValue().not() or (start <= end))
24. Task.executionPeriod.start
Définition | The start of the period. The boundary is inclusive.
Short | Date d'envoi au destinataire du traitement de l'anomalieStarting time with inclusive boundary
Commentaires | If the low element is missing, the meaning is that the low boundary is not known.
Control | 0..1 This element is affected by the following invariants: ele-1, per-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Task.executionPeriod.end
Définition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Short | Date de fin de traitement de l'anomalie par le destinataireEnd time with inclusive boundary, if not ongoing
Commentaires | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Control | 0..1 This element is affected by the following invariants: ele-1, per-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Task.authoredOn
Définition | The date and time this task was created.
Short | Date création de l'anomalieTask Creation Date
Control | 10..1 This element is affected by the following invariants: ele-1, inv-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Requirements | Most often used along with lastUpdated to track duration of task to supporting monitoring and management.
Alternate Names | Created Date
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Task.lastModified
Définition | The date and time of last modification to this task.
Short | Date de dernière modificationTask Last Modified Date
Control | 10..1 This element is affected by the following invariants: ele-1, inv-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Requirements | Used along with history to track task activity and time in a particular task state. This enables monitoring and management.
Alternate Names | Update Date
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Task.requester
Définition | The creator of the task.
Short | Who is asking for task to be done
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, Device, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Résumé | true
Requirements | Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
34. Task.owner
Définition | Individual organization or Device currently responsible for task execution.
Short | Responsible individual
Commentaires | Tasks may be created with an owner not yet identified.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService, Practitioner, PractitionerRole, Organization, CareTeam, HealthcareService, Patient, Device, RelatedPerson)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Résumé | true
Requirements | Identifies who is expected to perform this task.
Alternate Names | Performer, Executer
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
36. Task.location
Définition | Principal physical location where the this task is performed.
Short | Where task occurs
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Location, RORLocation)
Résumé | true
Requirements | Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
38. Task.reasonCode
Définition | A description or code indicating why this task needs to be performed.
Short | Type d'action proposée en réponseWhy task is needed
Commentaires | This should only be included if there is no focus or if it differs from the reason indicated on the focus.
Control | 10..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from For example codes, see JDV_J242_ActionAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Task.input
Définition | Additional information that may be needed in the execution of the task.
Short | Eléments en entrée pour définir l'anomalieInformation used to perform task
Control | 10..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing | This element introduces a set of slices on `Task.input`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
42. Task.input.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
44. Task.input.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Task.input.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Task.input:ruleErrorId
Nom de la slice | ruleErrorId
Définition | Additional information that may be needed in the execution of the task.
Short | Identifiant de la règle à l'origine de l'anomalieInformation used to perform task
Control | 0..1* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Task.input:ruleErrorId.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Task.input:ruleErrorId.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "ruleErrorId" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Task.input:ruleErrorId.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Task.input:errorValue
Nom de la slice | errorValue
Définition | Additional information that may be needed in the execution of the task.
Short | donnée erronéeInformation used to perform task
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Task.input:errorValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. Task.input:errorValue.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "errorValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Task.input:errorValue.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Task.input:proposedValue
Nom de la slice | proposedValue
Définition | Additional information that may be needed in the execution of the task.
Short | nouvelle valeur proposéeInformation used to perform task
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Task.input:proposedValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Task.input:proposedValue.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "proposedValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Task.input:proposedValue.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Task.input:pathElementError
Nom de la slice | pathElementError
Définition | Additional information that may be needed in the execution of the task.
Short | élément en erreur dans la ressourceInformation used to perform task
Control | 0..1* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Task.input:pathElementError.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. Task.input:pathElementError.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "pathElementError" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Task.input:pathElementError.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Expression, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Task.input:systemRequester
Nom de la slice | systemRequester
Définition | Additional information that may be needed in the execution of the task.
Short | système déclarant l'anomalieInformation used to perform task
Control | 10..1* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Task.input:systemRequester.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. Task.input:systemRequester.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "systemRequester" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Task.input:systemRequester.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Task.input:identifierRequester
Nom de la slice | identifierRequester
Définition | Additional information that may be needed in the execution of the task.
Short | Identifiant du déclarant de l'anomalieInformation used to perform task
Control | 0..1* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Task.input:identifierRequester.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
92. Task.input:identifierRequester.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "identifierRequester" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Task.input:identifierRequester.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Task.output
Définition | Outputs produced by the Task.
Short | Eléments en sortie concerant le traitement de l'anomalieInformation produced as part of task
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing | This element introduces a set of slices on `Task.output`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
98. Task.output.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Task.output.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Task.output.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Task.output:newValue
Nom de la slice | newValue
Définition | Outputs produced by the Task.
Short | Valeur corrigéeInformation produced as part of task
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Task.output:newValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Task.output:newValue.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "newValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Task.output:newValue.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Task.output:identifierAnalyst
Nom de la slice | identifierAnalyst
Définition | Outputs produced by the Task.
Short | identifiant du destinataire du traitement de la demandeInformation produced as part of task
Control | 0..1* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. Task.output:identifierAnalyst.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
116. Task.output:identifierAnalyst.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "identifierAnalyst" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Task.output:identifierAnalyst.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Task
Définition | A task to be performed.
Short | A task to be performed
Control | 0..*
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-6: A resource should have narrative for robust management (`text.`div`.exists()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) inv-1: Last modified date must be greater than or equal to authored-on date. (`lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn`)
2. Task.id
Définition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Short | Logical id of this artifact
Commentaires | The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
Control | 0..1
Type | id
Résumé | true
4. Task.meta
Définition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Short | Metadata about the resource
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Meta
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
6. Task.implicitRules
Définition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Commentaires | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
8. Task.language
Définition | The base language in which the resource is written.
Short | Language of the resource content
Commentaires | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHOULD be taken from CommonLanguages (preferred to `http://hl7.org/fhir/ValueSet/languages` ) A human language.
Bindings Additionnels | But
AllLanguages | Binding Max
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
10. Task.text
Définition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Short | Text summary of the resource, for human interpretation
Commentaires | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Narrative
Alternate Names | narrative, html, xhtml, display
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
12. Task.contained
Définition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
Short | Contained, inline Resources
Commentaires | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
Control | 0..*
Type | Resource
Alternate Names | inline resources, anonymous resources, contained resources
14. Task.extension
Définition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
16. Task.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard Status | Normative (from Trial Use)
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
18. Task.identifier
Définition | The business identifier for this task.
Short | Identifiant de l'anomalie
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
20. Task.instantiatesCanonical
Définition | The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.
Short | Formal definition of task
Commentaires | see Canonical References
Control | 0..1 This element is affected by the following invariants: ele-1
Type | canonical(ActivityDefinition)
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Requirements | Enables a formal definition of how he task is to be performed, enabling automation.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
22. Task.instantiatesUri
Définition | The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task.
Short | Formal definition of task
Commentaires | see http://en.wikipedia.org/wiki/Uniform_resource_identifier
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Requirements | Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
24. Task.basedOn
Définition | BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient.
Short | Request fulfilled by this task
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Resource)
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
26. Task.groupIdentifier
Définition | An identifier that links together multiple tasks and other requests that were created in the same context.
Short | Requisition or grouper id
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Identifier
Résumé | true
Requirements | Billing and/or reporting can be linked to whether multiple requests were created as a single unit.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
28. Task.partOf
Définition | Task that this particular task is part of.
Short | Composite task
Commentaires | This should usually be 0..1.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Task, RORTask)
Résumé | true
Requirements | Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task).
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
30. Task.status
Définition | The current status of the task.
Short | draft | requested | received | accepted | +
Commentaires | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from TaskStatus (required to `http://hl7.org/fhir/ValueSet/task-status|4.0.1` ) The current status of the task.
Type | code
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Requirements | These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
32. Task.statusReason
Définition | An explanation as to why this task is held, failed, was refused, etc.
Short | Reason for current status
Commentaires | This applies to the current status. Look at the history of the task to see reasons for past statuses.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify the reason for current status. These will typically be specific to a particular workflow.
Type | CodeableConcept
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
34. Task.businessStatus
Définition | Contains business-specific nuances of the business state.
Short | Statut métier de traitement de l'anomalie
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J244_StatutMetierAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Résumé | true
Requirements | There's often a need to track substates of a task - this is often variable by specific workflow implementation.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Task.intent
Définition | Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc.
Short | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option
Commentaires | This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances. In most cases, Tasks will have an intent of "order".
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from TaskIntent (required to `http://hl7.org/fhir/ValueSet/task-intent|4.0.1` ) Distinguishes whether the task is a proposal, plan or full order.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
38. Task.priority
Définition | Indicates how quickly the Task should be addressed with respect to other requests.
Short | routine | urgent | asap | stat
Commentaires | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from RequestPriority (required to `http://hl7.org/fhir/ValueSet/request-priority|4.0.1` ) The task's priority.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Used to identify the service level expected while performing a task.
Meaning if Missing | If missing, this task should be performed with normal priority
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
40. Task.code
Définition | A name or code (or both) briefly describing what the task involves.
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, Exhaustivité
Commentaires | The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J241_ThematiqueAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
42. Task.description
Définition | A free-text description of what is to be performed.
Short | Description de l'anomalie
Commentaires | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
44. Task.focus
Définition | The request being actioned or the resource being manipulated by this task.
Short | référence vers la ressources en anomalie
Commentaires | If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.).
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Reference(Resource)
Must Support | true
Résumé | true
Requirements | Used to identify the thing to be done.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
46. Task.for
Définition | The entity who benefits from the performance of the service specified in the task (e.g., the patient).
Short | Beneficiary of the Task
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Resource)
Résumé | true
Requirements | Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control.
Alternate Names | Patient
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
48. Task.encounter
Définition | The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created.
Short | Healthcare event during which this task originated
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Encounter)
Résumé | true
Requirements | For some tasks it may be important to know the link between the encounter the task originated within.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
50. Task.executionPeriod
Définition | Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end).
Short | Start and end time of execution
Commentaires | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
52. Task.executionPeriod.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
54. Task.executionPeriod.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.executionPeriod.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
56. Task.executionPeriod.start
Définition | The start of the period. The boundary is inclusive.
Short | Date d'envoi au destinataire du traitement de l'anomalie
Commentaires | If the low element is missing, the meaning is that the low boundary is not known.
Control | 0..1 This element is affected by the following invariants: ele-1, per-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
58. Task.executionPeriod.end
Définition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Short | Date de fin de traitement de l'anomalie par le destinataire
Commentaires | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Control | 0..1 This element is affected by the following invariants: ele-1, per-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
60. Task.authoredOn
Définition | The date and time this task was created.
Short | Date création de l'anomalie
Control | 1..1 This element is affected by the following invariants: ele-1, inv-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Requirements | Most often used along with lastUpdated to track duration of task to supporting monitoring and management.
Alternate Names | Created Date
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
62. Task.lastModified
Définition | The date and time of last modification to this task.
Short | Date de dernière modification
Control | 1..1 This element is affected by the following invariants: ele-1, inv-1
Type | dateTime
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Résumé | true
Requirements | Used along with history to track task activity and time in a particular task state. This enables monitoring and management.
Alternate Names | Update Date
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
64. Task.requester
Définition | The creator of the task.
Short | Who is asking for task to be done
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Résumé | true
Requirements | Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task).
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
66. Task.performerType
Définition | The kind of participant that should perform the task.
Short | Requested performer
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 0..* This element is affected by the following invariants: ele-1
Binding | The codes SHOULD be taken from ProcedurePerformerRoleCodes (preferred to `http://hl7.org/fhir/ValueSet/performer-role` ) The type(s) of task performers allowed.
Type | CodeableConcept
Requirements | Use to distinguish tasks on different activity queues.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
68. Task.owner
Définition | Individual organization or Device currently responsible for task execution.
Short | Responsible individual
Commentaires | Tasks may be created with an owner not yet identified.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Résumé | true
Requirements | Identifies who is expected to perform this task.
Alternate Names | Performer, Executer
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
70. Task.location
Définition | Principal physical location where the this task is performed.
Short | Where task occurs
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Location, RORLocation)
Résumé | true
Requirements | Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting).
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
72. Task.reasonCode
Définition | A description or code indicating why this task needs to be performed.
Short | Type d'action proposée en réponse
Commentaires | This should only be included if there is no focus or if it differs from the reason indicated on the focus.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J242_ActionAnomalie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR` )
Type | CodeableConcept
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
74. Task.reasonReference
Définition | A resource reference indicating why this task needs to be performed.
Short | Why task is needed
Commentaires | Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in `Task.reasonCode` if the data is free (uncoded) text.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Resource)
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
76. Task.insurance
Définition | Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task.
Short | Associated insurance coverage
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Coverage, ClaimResponse)
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
78. Task.note
Définition | Free-text information captured about the task as it progresses.
Short | Comments made about the task
Commentaires | For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible).
Control | 0..* This element is affected by the following invariants: ele-1
Type | Annotation
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
80. Task.relevantHistory
Définition | Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task.
Short | Key events in history of the Task
Commentaires | This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Provenance)
Alternate Names | Status History
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
82. Task.restriction
Définition | If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned.
Short | Constraints on fulfillment tasks
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Requirements | Sometimes when fulfillment is sought, you don't want full fulfillment.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
84. Task.restriction.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
86. Task.restriction.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.restriction.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
88. Task.restriction.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
90. Task.restriction.repetitions
Définition | Indicates the number of times the requested action should occur.
Short | How many times to repeat
Commentaires | 32 bit number; for values larger than this, use decimal
Control | 0..1 This element is affected by the following invariants: ele-1
Type | positiveInt
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | E.g. order that requests monthly lab tests, fulfillment is sought for 1.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
92. Task.restriction.period
Définition | Over what time-period is fulfillment sought.
Short | When fulfillment sought
Commentaires | Note that period.high is the due date representing the time by which the task should be completed.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Requirements | E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
94. Task.restriction.recipient
Définition | For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought?
Short | For whom is fulfillment sought?
Commentaires | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole)
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
96. Task.input
Définition | Additional information that may be needed in the execution of the task.
Short | Eléments en entrée pour définir l'anomalie
Control | 1..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing | This element introduces a set of slices on `Task.input`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
98. Task.input.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
100. Task.input.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Task.input.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
104. Task.input.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
106. Task.input.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
108. Task.input:ruleErrorId
Nom de la slice | ruleErrorId
Définition | Additional information that may be needed in the execution of the task.
Short | Identifiant de la règle à l'origine de l'anomalie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
110. Task.input:ruleErrorId.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
112. Task.input:ruleErrorId.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
114. Task.input:ruleErrorId.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
116. Task.input:ruleErrorId.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "ruleErrorId" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
118. Task.input:ruleErrorId.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | string
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
120. Task.input:errorValue
Nom de la slice | errorValue
Définition | Additional information that may be needed in the execution of the task.
Short | donnée erronée
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
122. Task.input:errorValue.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
124. Task.input:errorValue.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
126. Task.input:errorValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
128. Task.input:errorValue.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "errorValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
130. Task.input:errorValue.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
132. Task.input:proposedValue
Nom de la slice | proposedValue
Définition | Additional information that may be needed in the execution of the task.
Short | nouvelle valeur proposée
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
134. Task.input:proposedValue.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
136. Task.input:proposedValue.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
138. Task.input:proposedValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
140. Task.input:proposedValue.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "proposedValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
142. Task.input:proposedValue.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
144. Task.input:pathElementError
Nom de la slice | pathElementError
Définition | Additional information that may be needed in the execution of the task.
Short | élément en erreur dans la ressource
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
146. Task.input:pathElementError.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
148. Task.input:pathElementError.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
150. Task.input:pathElementError.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
152. Task.input:pathElementError.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "pathElementError" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
154. Task.input:pathElementError.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Expression
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
156. Task.input:systemRequester
Nom de la slice | systemRequester
Définition | Additional information that may be needed in the execution of the task.
Short | système déclarant l'anomalie
Control | 1..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
158. Task.input:systemRequester.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
160. Task.input:systemRequester.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
162. Task.input:systemRequester.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
164. Task.input:systemRequester.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "systemRequester" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
166. Task.input:systemRequester.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | string
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
168. Task.input:identifierRequester
Nom de la slice | identifierRequester
Définition | Additional information that may be needed in the execution of the task.
Short | Identifiant du déclarant de l'anomalie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows.
Alternate Names | Supporting Information
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
170. Task.input:identifierRequester.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
172. Task.input:identifierRequester.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.input.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
174. Task.input:identifierRequester.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
176. Task.input:identifierRequester.type
Définition | A code or description indicating how the input is intended to be used as part of the task execution.
Short | Label for the input
Commentaires | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc.
Type | CodeableConcept
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/input-task-ror-codesystem", "code" : "identifierRequester" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
178. Task.input:identifierRequester.value[x]
Définition | The value of the input parameter as a basic type.
Short | Content to use in performing the task
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Identifier
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
180. Task.output
Définition | Outputs produced by the Task.
Short | Eléments en sortie concerant le traitement de l'anomalie
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing | This element introduces a set of slices on `Task.output`. The slices areUnordered and Open, and can be differentiated using the following discriminators: pattern @ type
182. Task.output.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
184. Task.output.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.output.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
186. Task.output.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
188. Task.output.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
190. Task.output.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
192. Task.output:newValue
Nom de la slice | newValue
Définition | Outputs produced by the Task.
Short | Valeur corrigée
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
194. Task.output:newValue.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
196. Task.output:newValue.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.output.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
198. Task.output:newValue.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
200. Task.output:newValue.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "newValue" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
202. Task.output:newValue.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
204. Task.output:identifierAnalyst
Nom de la slice | identifierAnalyst
Définition | Outputs produced by the Task.
Short | identifiant du destinataire du traitement de la demande
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Must Support | true
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
206. Task.output:identifierAnalyst.id
Définition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
208. Task.output:identifierAnalyst.extension
Définition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Task.output.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
210. Task.output:identifierAnalyst.modifierExtension
Définition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Commentaires | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Résumé | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
212. Task.output:identifierAnalyst.type
Définition | The name of the Output parameter.
Short | Label for output
Commentaires | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc.
Type | CodeableConcept
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next.
Alternate Names | Name
Pattern Value | `{ "coding" : [{ "system" : "https://interop.esante.gouv.fr/ig/fhir/ror/CodeSystem/output-task-ror-codesystem", "code" : "identifierAnalyst" }] }`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
214. Task.output:identifierAnalyst.value[x]
Définition | The value of the Output parameter as a basic type.
Short | Result of output
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Identifier
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Requirements | Task outputs can take any form.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)