Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social
0.5.0-snapshot-1 - ci-build

Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social - Local Development build (v0.5.0-snapshot-1) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

## Resource Profile: RORLocation - Detailed Descriptions

Draft as of 2025-02-17

Definitions for the ror-location resource profile.

- Key Elements Table
- Differential Elements Table
- Snapshot Elements Table

Guidance on how to interpret the contents of this table can be found here

0. Location
Definition | Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.
Short | Details and position information for a physical place
Control | 0..*
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
2. Location.id
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Short | Logical id of this artifact
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
Control | 0..1
Type | id string
Summary | true
4. Location.meta
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Short | Metadata about the resource
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Meta
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Location.meta.lastUpdated
Definition | When the resource last changed - e.g. when the version changed.
Short | When the resource version last changed
Comments | This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.
Control | 10..1 This element is affected by the following invariants: ele-1
Type | instant
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Location.meta.tag
Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.
Short | Tags applied to this resource
Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.
Control | 0..* This element is affected by the following invariants: ele-1
Binding | For example codes, see CommonTags http://hl7.org/fhir/ValueSet/common-tags (example to `http://hl7.org/fhir/ValueSet/common-tags` ) Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
Type | Coding
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing | This element introduces a set of slices on `Location.meta.tag`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
10. Location.meta.tag:codeRegion
Slice Name | codeRegion
Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.
Short | Tags applied to this resource
Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.
Control | 0..1* This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from For example codes, see JDV_J237_RegionOM_ROR http://hl7.org/fhir/ValueSet/common-tags (required to `https://mos.esante.gouv.fr/NOS/JDV_J237-RegionOM-ROR/FHIR/JDV-J237-RegionOM-ROR` )
Type | Coding
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Location.extension
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | ExtensionAdditional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 20..* This element is affected by the following invariants: ele-1
Type | Extension
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing | This element introduces a set of slices on `Location.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
16. Location.extension:ror-commune-cog
Slice Name | ror-commune-cog
Definition | Extension créée dans le cadre du ROR pour représenter le code officiel géographique (COG) de la commune dans laquelle le lieu est situé.
Short | communeCog (LieuRealisationOffre) : Code officiel géographique (COG) de la commune dans laquelle le lieu est situé
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORCommuneCog) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Location.extension:ror-location-equipment
Slice Name | ror-location-equipment
Definition | Extension créée dans le cadre du ROR pour décrire une ressource matérielle discriminante pour la réalisation d'une prestation. Cette extension a été créée, car Device ne correspondait pas à la définition de l'équipement pour le ROR. Device représente une instance d'un équipement alors l'équipement pour le ROR correspond juste au nombre d'équipement de même type.
Short | EquipementSpecifique : Ressource matérielle discriminante pour la réalisation d'une prestation
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationEquipment) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Location.extension:ror-location-residential-capacity
Slice Name | ror-location-residential-capacity
Definition | Extension créée dans le cadre du ROR qui décrit un type d'habitation adapté à la réalisation d'une offre.
Short | CapaciteHabitation : type d'habitation adapté à la réalisation d'une offre
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationResidentialCapacity) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
22. Location.extension:ror-location-supported-capacity
Slice Name | ror-location-supported-capacity
Definition | Extension créée dans le cadre du ROR qui indique une série d’enregistrements indiquant la quantité de lit (ou de place) de l'entité pour un statut et une temporalité donnés.
Short | CapacitePriseCharge : + CapaciteAccueilOperationnelle
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationSupportedCapacity) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Location.extension:ror-meta-creation-date
Slice Name | ror-meta-creation-date
Definition | Extension créée dans le cadre du ROR qui correspond à la date de création (dans le ROR régional) présente dans les métadonnées.
Short | dateCreation (Metadonnee)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORMetaCreationDate) (Extension Type: dateTime)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Location.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard Status | Normative (from Trial Use)
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing | This element introduces a set of slices on `Location.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
28. Location.identifier
Definition | Unique code or number identifying the location to its users.
Short | Unique code or number identifying the location to its users
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..* This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing | This element introduces a set of slices on `Location.identifier`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ type.coding.code
30. Location.identifier:idExterneSynchro
Slice Name | idExterneSynchro
Definition | Unique code or number identifying the location to its users.
Short | idExterneSynchro (LieuRealisationOffre) : Identifiant défini par le porteur d’offre pour la zone d’hébergement des litsUnique code or number identifying the location to its users
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1* This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Location.identifier:idExterneSynchro.use
Definition | The purpose of this identifier.
Short | usual | official | temp | secondary | old (If known)
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 (required to `http://hl7.org/fhir/ValueSet/identifier-use|4.0.1` ) Identifies the purpose for this identifier, if known .
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.identifier:idExterneSynchro.type
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Short | Description of identifier
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Control | 10..1 This element is affected by the following invariants: ele-1
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes http://hl7.org/fhir/ValueSet/identifier-type (extensible to `http://hl7.org/fhir/ValueSet/identifier-type` ) A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
Type | CodeableConcept
Must Support | true
Summary | true
Requirements | Allows users to make use of identifiers when the identifier system is not known.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.identifier:idLocation
Slice Name | idLocation
Definition | Unique code or number identifying the location to its users.
Short | identifiant (LieuRealisationOffre) : Identifiant fonctionnel du lieuUnique code or number identifying the location to its users
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1* This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.identifier:idLocation.use
Definition | The purpose of this identifier.
Short | usual | official | temp | secondary | old (If known)
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from IdentifierUse http://hl7.org/fhir/ValueSet/identifier-use|4.0.1 (required to `http://hl7.org/fhir/ValueSet/identifier-use|4.0.1` ) Identifies the purpose for this identifier, if known .
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.identifier:idLocation.type
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Short | Description of identifier
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Control | 10..1 This element is affected by the following invariants: ele-1
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes http://hl7.org/fhir/ValueSet/identifier-type (extensible to `http://hl7.org/fhir/ValueSet/identifier-type` ) A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
Type | CodeableConcept
Must Support | true
Summary | true
Requirements | Allows users to make use of identifiers when the identifier system is not known.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Location.status
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.
Short | active | suspended | inactive
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from LocationStatus http://hl7.org/fhir/ValueSet/location-status|4.0.1 (required to `http://hl7.org/fhir/ValueSet/location-status|4.0.1` ) Indicates whether the location is still in use.
Type | code
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Location.operationalStatus
Definition | The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.
Short | statut (LieuRealisationOffre) : Indique si le lieu est opérationnel, fermé temporairement ou fermé définitivementThe operational status of the location (typically only for a bed/room)
Comments | Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from The codes SHOULD be taken from JDV_J224_StatutLieu_ROR http://terminology.hl7.org/ValueSet/v2-0116 (required to `https://mos.esante.gouv.fr/NOS/JDV_J224-StatutLieu-ROR/FHIR/JDV-J224-StatutLieu-ROR` )
Type | Coding
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Location.name
Definition | Name of the location as used by humans. Does not need to be unique.
Short | nom (LieuRealisationOffre) : Nom, exprimé sous la forme de texte, du lieuName of the location as used by humans
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Location.alias
Definition | A list of alternate names that the location is known as, or was known as, in the past.
Short | A list of alternate names that the location is known as, or was known as, in the past
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.
Control | 0..* This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing | This element introduces a set of slices on `Location.alias`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
50. Location.alias:nomExterneSynchro
Slice Name | nomExterneSynchro
Definition | A list of alternate names that the location is known as, or was known as, in the past.
Short | A list of alternate names that the location is known as, or was known as, in the past
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.
Control | 0..1* This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Location.description
Definition | Description of the Location, which helps in finding or referencing the place.
Short | description (LieuRealisationOffre) : Description textuelle du lieu, indiquant comment l'atteindreAdditional details about the location that could be displayed as further information to identify the location beyond its name
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Requirements | Humans need additional information to verify a correct location has been identified.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Location.type
Definition | Indicates the type of function performed at the location.
Short | fonctionLieu (LieuRealisationOffre) : La fonction correspond à la destination d'usage du lieuType of function performed
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 0..1* This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from Unless not suitable, these codes SHALL be taken from JDV_J198_FonctionLieu_ROR http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType (required to `https://mos.esante.gouv.fr/NOS/JDV_J198-FonctionLieu-ROR/FHIR/JDV-J198-FonctionLieu-ROR` )
Type | CodeableConcept
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Location.telecom
Definition | The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.
Short | telecommunication (LieuRealisationOffre) : Adresse(s) de télécommunication du lieuContact details of the location
Control | 0..* This element is affected by the following invariants: ele-1
Type | ContactPoint
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) cpt-2: A system is required if a value is provided. (value.empty() or system.exists())
58. Location.telecom.extension
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | ExtensionAdditional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 20..* This element is affected by the following invariants: ele-1
Type | Extension
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing | This element introduces a set of slices on `Location.telecom.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
60. Location.telecom.extension:ror-telecom-communication-channel
Slice Name | ror-telecom-communication-channel
Definition | Extension créée dans le cadre du ROR spécifiant le canal ou la manière dont s'établit la communication
Short | canal (Telecommunication) : Code spécifiant le canal ou la manière dont s'établit la communication
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomCommunicationChannel) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Location.telecom.extension:ror-telecom-usage
Slice Name | ror-telecom-usage
Definition | Extension créée dans le cadre du ROR qui précise l'utilisation du canal de communication
Short | utilisation (Telecommunication) : Utilisation du canal de communication
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomUsage) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Location.telecom.extension:ror-telecom-confidentiality-level
Slice Name | ror-telecom-confidentiality-level
Definition | Extension créée dans le cadre du ROR qui permet de définir le niveau de restriction de l'accès aux attributs de la classe Télécommunication.
Short | niveauConfidentialite (Telecommunication) : Niveau de restriction de l'accès aux attributs de la classe Télécommunication
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomConfidentialityLevel) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Location.telecom.system
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact.
Short | phone | fax | email | pager | url | sms | other
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1, cpt-2
Binding | The codes SHALL be taken from ContactPointSystem http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1 (required to `http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1` ) Telecommunications form for contact point.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Location.telecom.value
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Short | adresseTelecom (Telecommunication) : Valeur de l'adresse de télécommunication dans le format induit par le canal de communicationThe actual contact point details
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Control | 10..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Requirements | Need to support legacy numbers that are not in a tightly controlled format.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Location.telecom.use
Definition | Identifies the purpose for the contact point.
Short | home | work | temp | old | mobile - purpose of this contact point
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from ContactPointUse http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1 (required to `http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1` ) Use of contact point.
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Location.address
Definition | Physical location.
Short | adresse (LieuRealisationOffre) : Adresse géopostale du lieuPhysical location
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Address
Requirements | If locations can be visited, we need to keep track of their address.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Location.address.use
Definition | The purpose of this address.
Short | home | work | temp | old | billing - purpose of this address
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from AddressUse http://hl7.org/fhir/ValueSet/address-use|4.0.1 (required to `http://hl7.org/fhir/ValueSet/address-use|4.0.1` ) The use of an address.
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows an appropriate address to be chosen from a list of many.
Example | <br/><b>General</b>:home
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Location.address.line
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.
Short | Street name, number, direction & P.O. Box etc.
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..* This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Example | <br/><b>General</b>:137 Nowhere Street
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Location.address.line.extension:careOf
Slice Name | careOf
Definition | The name of the party who will take receipt at the specified address, and will take on responsibility for ensuring delivery to the target recipient.
Short | pointRemise (Adresse) : Lieu où le destinataire prend possession de son courrier
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Care Of) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Location.address.line.extension:additionalLocator
Slice Name | additionalLocator
Definition | This can be a unit designator, such as apartment number, suite number, or floor. There may be several unit designators in an address (e.g., "3rd floor, Appt. 342"). This can also be a designator pointing away from the location, rather than specifying a smaller location within some larger one (e.g., Dutch "t.o." means "opposite to" for house boats located across the street facing houses).
Short | complementPointGeographique (Adresse) : Un complément de l'adresse au point géographique
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Additional Locator) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Location.address.line.extension:houseNumber
Slice Name | houseNumber
Definition | The number of a building, house or lot alongside the street. Also known as "primary street number". This does not number the street but rather the building.
Short | numeroVoie (Adresse) : Un numéro dans la voie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP House Number) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
84. Location.address.line.extension:buildingNumberSuffix
Slice Name | buildingNumberSuffix
Definition | Any alphabetic character, fraction or other text that may appear after the numeric portion of a building number.
Short | extension (Adresse) : Extension ou indice de répétition
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Building Number Suffix) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. Location.address.line.extension:streetNameType
Slice Name | streetNameType
Definition | The designation given to the street. (e.g. Street, Avenue, Crescent, etc.).
Short | typeVoie (Adresse) : Type de voie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Street Name Type) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
88. Location.address.line.extension:streetNameType.extension
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | ExtensionAdditional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..0* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | false
Summary | false
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing | This element introduces a set of slices on `Location.address.line.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
90. Location.address.line.extension:streetNameType.url
Definition | Source of the definition for the extension code - a logical name or a URL.
Short | identifies the meaning of the extension
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control | 1..1
Type | uri
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
Fixed Value | `http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetNameType`
92. Location.address.line.extension:streetNameType.value[x]
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short | Value of extension
Control | 10..1 This element is affected by the following invariants: ext-1, ele-1
Binding | The codes SHALL be taken from For codes, see JDV_J219_TypeVoie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J219-TypeVoie-ROR/FHIR/JDV-J219-TypeVoie-ROR` )
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier | false
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Location.address.line.extension:streetNameBase
Slice Name | streetNameBase
Definition | The base name of a roadway or artery recognized by a municipality (excluding street type and direction).
Short | libelleVoie (Adresse) : Appellation qui est donnée à la voie par les municipalités
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Street Name Base) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Location.address.line.extension:postalBox
Slice Name | postalBox
Definition | A numbered box located in a post station.
Short | mentionDistribution (Adresse) : Mentions particulières de distribution
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Post Box) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Location.address.line.extension:lieuDit
Slice Name | lieuDit
Definition | Extension créée dans le cadre du ROR pour indiquer le lieu dit
Short | lieuDit (Adresse) : Lieu qui porte un nom rappelant une particularité topographique ou historique
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(AsLieuDit) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
100. Location.address.city
Definition | The name of the city, town, suburb, village or other community or delivery center.
Short | localité (Adresse) : Localité ou Libellé du bureau distributeur CEDEXName of city, town etc.
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | Municpality
Example | <br/><b>General</b>:Erewhon
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Location.address.postalCode
Definition | A postal code designating a region defined by the postal service.
Short | codePostal (Adresse) : Code Postal ou code postal spécifique CEDEXPostal code for area
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | Zip
Example | <br/><b>General</b>:9132
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Location.position
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).
Short | coordonneeGeographique (LieuRealisationOffre) : Coordonnées géographiques du lieu (système géodésique : WGS84)The absolute geographic location
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Requirements | For mobile applications and automated route-finding knowing the exact location of the Location is required.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Location.position.extension:ror-coordinate-reliability
Slice Name | ror-coordinate-reliability
Definition | Extension créée dans le cadre du ROR pour signaler si les informations des coordonnées géographiques sont issues d'un mode de production qui assure un certain niveau de fiabilité
Short | coordonneesFiables (CoordonneeGeographique) : Permet de signaler si les informations des coordonnées géographiques sont issues d'un mode de production qui assure un certain niveau de fiabilité
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(RORCoordinateReliability) (Extension Type: boolean)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Location.position.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
110. Location.position.longitude
Definition | Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).
Short | longitude (CoordonneeGeographique) : Une mesure de la distance angulaire est ou ouest depuis le méridien de Greenwich jusqu'au méridien du point spécifiqueLongitude with WGS84 datum
Comments | Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | decimal
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Location.position.latitude
Definition | Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).
Short | latitude (CoordonneeGeographique) : Une mesure de la distance angulaire nord ou sud depuis l'équateur jusqu'au parallèle du spécifiqueLatitude with WGS84 datum
Comments | Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | decimal
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. Location.managingOrganization
Definition | The organization responsible for the provisioning and upkeep of the location.
Short | Organization responsible for provisioning and upkeep
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(FrOrganization, ROROrganization, Organization)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Summary | true
Requirements | Need to know who manages the location.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))
116. Location.partOf
Definition | Another Location of which this Location is physically a part of.
Short | Another Location this one is physically a part of
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Location, RORLocation)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Requirements | For purposes of location, display and identification, knowing which locations are located within other locations is important.
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')))

Guidance on how to interpret the contents of this table can be found here

0. Location
2. Location.id
4. Location.meta
6. Location.meta.lastUpdated
Control | 1..?
Must Support | true
8. Location.meta.tag
Slicing | This element introduces a set of slices on `Location.meta.tag`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
10. Location.meta.tag:codeRegion
Slice Name | codeRegion
Control | 0..1
Binding | The codes SHALL be taken from JDV_J237_RegionOM_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J237-RegionOM-ROR/FHIR/JDV-J237-RegionOM-ROR` )
Must Support | true
12. Location.extension
Control | 2..?
14. Location.extension:ror-commune-cog
Slice Name | ror-commune-cog
Short | communeCog (LieuRealisationOffre) : Code officiel géographique (COG) de la commune dans laquelle le lieu est situé
Control | 1..1
Type | Extension(RORCommuneCog) (Extension Type: CodeableConcept)
Must Support | true
16. Location.extension:ror-location-equipment
Slice Name | ror-location-equipment
Short | EquipementSpecifique : Ressource matérielle discriminante pour la réalisation d'une prestation
Control | 0..*
Type | Extension(RORLocationEquipment) (Complex Extension)
Must Support | true
18. Location.extension:ror-location-residential-capacity
Slice Name | ror-location-residential-capacity
Short | CapaciteHabitation : type d'habitation adapté à la réalisation d'une offre
Control | 0..*
Type | Extension(RORLocationResidentialCapacity) (Complex Extension)
Must Support | true
20. Location.extension:ror-location-supported-capacity
Slice Name | ror-location-supported-capacity
Short | CapacitePriseCharge : + CapaciteAccueilOperationnelle
Control | 0..*
Type | Extension(RORLocationSupportedCapacity) (Complex Extension)
Must Support | true
22. Location.extension:ror-meta-creation-date
Slice Name | ror-meta-creation-date
Short | dateCreation (Metadonnee)
Control | 1..1
Type | Extension(RORMetaCreationDate) (Extension Type: dateTime)
Must Support | true
24. Location.identifier
Note | This is a business identifier, not a resource identifier (see discussion)
Must Support | true
Slicing | This element introduces a set of slices on `Location.identifier`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ type.coding.code
26. Location.identifier:idExterneSynchro
Slice Name | idExterneSynchro
Short | idExterneSynchro (LieuRealisationOffre) : Identifiant défini par le porteur d’offre pour la zone d’hébergement des lits
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1
Must Support | true
28. Location.identifier:idExterneSynchro.type
Control | 1..?
Must Support | true
30. Location.identifier:idExterneSynchro.type.coding
32. Location.identifier:idExterneSynchro.type.coding.code
Control | 1..?
Pattern Value | `26`
34. Location.identifier:idLocation
Slice Name | idLocation
Short | identifiant (LieuRealisationOffre) : Identifiant fonctionnel du lieu
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1
Must Support | true
36. Location.identifier:idLocation.type
Control | 1..?
Must Support | true
38. Location.identifier:idLocation.type.coding
40. Location.identifier:idLocation.type.coding.code
Control | 1..?
Pattern Value | `25`
42. Location.status
44. Location.operationalStatus
Short | statut (LieuRealisationOffre) : Indique si le lieu est opérationnel, fermé temporairement ou fermé définitivement
Binding | The codes SHALL be taken from JDV_J224_StatutLieu_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J224-StatutLieu-ROR/FHIR/JDV-J224-StatutLieu-ROR` )
Must Support | true
46. Location.name
Short | nom (LieuRealisationOffre) : Nom, exprimé sous la forme de texte, du lieu
Must Support | true
48. Location.alias
Slicing | This element introduces a set of slices on `Location.alias`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
50. Location.alias:nomExterneSynchro
Slice Name | nomExterneSynchro
Control | 0..1
Must Support | true
52. Location.description
Short | description (LieuRealisationOffre) : Description textuelle du lieu, indiquant comment l'atteindre
Must Support | true
54. Location.type
Short | fonctionLieu (LieuRealisationOffre) : La fonction correspond à la destination d'usage du lieu
Control | 0..1
Binding | The codes SHALL be taken from JDV_J198_FonctionLieu_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J198-FonctionLieu-ROR/FHIR/JDV-J198-FonctionLieu-ROR` )
Must Support | true
56. Location.telecom
Short | telecommunication (LieuRealisationOffre) : Adresse(s) de télécommunication du lieu
Must Support | true
58. Location.telecom.extension
Control | 2..?
60. Location.telecom.extension:ror-telecom-communication-channel
Slice Name | ror-telecom-communication-channel
Short | canal (Telecommunication) : Code spécifiant le canal ou la manière dont s'établit la communication
Control | 1..1
Type | Extension(RORTelecomCommunicationChannel) (Extension Type: CodeableConcept)
Must Support | true
62. Location.telecom.extension:ror-telecom-usage
Slice Name | ror-telecom-usage
Short | utilisation (Telecommunication) : Utilisation du canal de communication
Control | 0..1
Type | Extension(RORTelecomUsage) (Extension Type: string)
Must Support | true
64. Location.telecom.extension:ror-telecom-confidentiality-level
Slice Name | ror-telecom-confidentiality-level
Short | niveauConfidentialite (Telecommunication) : Niveau de restriction de l'accès aux attributs de la classe Télécommunication
Control | 1..1
Type | Extension(RORTelecomConfidentialityLevel) (Extension Type: CodeableConcept)
Must Support | true
66. Location.telecom.value
Short | adresseTelecom (Telecommunication) : Valeur de l'adresse de télécommunication dans le format induit par le canal de communication
Control | 1..?
Must Support | true
68. Location.address
Short | adresse (LieuRealisationOffre) : Adresse géopostale du lieu
70. Location.address.line
72. Location.address.line.extension:careOf
Slice Name | careOf
Short | pointRemise (Adresse) : Lieu où le destinataire prend possession de son courrier
Control | 0..1
Type | Extension(ADXP Care Of) (Extension Type: string)
Must Support | true
74. Location.address.line.extension:additionalLocator
Slice Name | additionalLocator
Short | complementPointGeographique (Adresse) : Un complément de l'adresse au point géographique
Control | 0..1
Type | Extension(ADXP Additional Locator) (Extension Type: string)
Must Support | true
76. Location.address.line.extension:houseNumber
Slice Name | houseNumber
Short | numeroVoie (Adresse) : Un numéro dans la voie
Control | 0..1
Type | Extension(ADXP House Number) (Extension Type: string)
Must Support | true
78. Location.address.line.extension:buildingNumberSuffix
Slice Name | buildingNumberSuffix
Short | extension (Adresse) : Extension ou indice de répétition
Control | 0..1
Type | Extension(ADXP Building Number Suffix) (Extension Type: string)
Must Support | true
80. Location.address.line.extension:streetNameType
Slice Name | streetNameType
Short | typeVoie (Adresse) : Type de voie
Control | 0..1
Type | Extension(ADXP Street Name Type) (Extension Type: string)
Must Support | true
82. Location.address.line.extension:streetNameType.value[x]
Binding | The codes SHALL be taken from JDV_J219_TypeVoie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J219-TypeVoie-ROR/FHIR/JDV-J219-TypeVoie-ROR` )
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
84. Location.address.line.extension:streetNameBase
Slice Name | streetNameBase
Short | libelleVoie (Adresse) : Appellation qui est donnée à la voie par les municipalités
Control | 0..1
Type | Extension(ADXP Street Name Base) (Extension Type: string)
Must Support | true
86. Location.address.line.extension:postalBox
Slice Name | postalBox
Short | mentionDistribution (Adresse) : Mentions particulières de distribution
Control | 0..1
Type | Extension(ADXP Post Box) (Extension Type: string)
Must Support | true
88. Location.address.line.extension:lieuDit
Slice Name | lieuDit
Short | lieuDit (Adresse) : Lieu qui porte un nom rappelant une particularité topographique ou historique
Control | 0..1
Type | Extension(AsLieuDit) (Extension Type: string)
Must Support | true
90. Location.address.city
Short | localité (Adresse) : Localité ou Libellé du bureau distributeur CEDEX
92. Location.address.postalCode
Short | codePostal (Adresse) : Code Postal ou code postal spécifique CEDEX
94. Location.position
Short | coordonneeGeographique (LieuRealisationOffre) : Coordonnées géographiques du lieu (système géodésique : WGS84)
96. Location.position.extension:ror-coordinate-reliability
Slice Name | ror-coordinate-reliability
Short | coordonneesFiables (CoordonneeGeographique) : Permet de signaler si les informations des coordonnées géographiques sont issues d'un mode de production qui assure un certain niveau de fiabilité
Control | 0..1
Type | Extension(RORCoordinateReliability) (Extension Type: boolean)
Must Support | true
98. Location.position.longitude
Short | longitude (CoordonneeGeographique) : Une mesure de la distance angulaire est ou ouest depuis le méridien de Greenwich jusqu'au méridien du point spécifique
100. Location.position.latitude
Short | latitude (CoordonneeGeographique) : Une mesure de la distance angulaire nord ou sud depuis l'équateur jusqu'au parallèle du spécifique
102. Location.managingOrganization
Type | Reference(FrOrganization, ROROrganization)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
104. Location.partOf
Type | Reference(Location, RORLocation)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles

Guidance on how to interpret the contents of this table can be found here

0. Location
Definition | Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.
Short | Details and position information for a physical place
Control | 0..*
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-6: A resource should have narrative for robust management (`text.`div`.exists()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`)
2. Location.id
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.
Short | Logical id of this artifact
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation.
Control | 0..1
Type | id
Summary | true
4. Location.meta
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.
Short | Metadata about the resource
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Meta
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
6. Location.meta.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
8. Location.meta.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.meta.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
10. Location.meta.versionId
Definition | The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.
Short | Version specific identifier
Comments | The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | id
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
12. Location.meta.lastUpdated
Definition | When the resource last changed - e.g. when the version changed.
Short | When the resource version last changed
Comments | This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.
Control | 1..1 This element is affected by the following invariants: ele-1
Type | instant
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
14. Location.meta.source
Definition | A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.
Short | Identifies where the resource comes from
Comments | In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Location.meta.profile
Definition | A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.
Short | Profiles this resource claims to conform to
Comments | It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.
Control | 0..* This element is affected by the following invariants: ele-1
Type | canonical(StructureDefinition)
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
18. Location.meta.security
Definition | Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.
Short | Security Labels applied to this resource
Comments | The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.
Control | 0..* This element is affected by the following invariants: ele-1
Binding | Unless not suitable, these codes SHALL be taken from All Security Labels (extensible to `http://hl7.org/fhir/ValueSet/security-labels` ) Security Labels from the Healthcare Privacy and Security Classification System.
Type | Coding
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
20. Location.meta.tag
Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.
Short | Tags applied to this resource
Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.
Control | 0..* This element is affected by the following invariants: ele-1
Binding | For example codes, see CommonTags (example to `http://hl7.org/fhir/ValueSet/common-tags` ) Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".
Type | Coding
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing | This element introduces a set of slices on `Location.meta.tag`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Location.meta.tag:codeRegion
Slice Name | codeRegion
Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.
Short | Tags applied to this resource
Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J237_RegionOM_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J237-RegionOM-ROR/FHIR/JDV-J237-RegionOM-ROR` )
Type | Coding
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
24. Location.implicitRules
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short | A set of rules under which this content was created
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Location.language
Definition | The base language in which the resource is written.
Short | Language of the resource content
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHOULD be taken from CommonLanguages (preferred to `http://hl7.org/fhir/ValueSet/languages` ) A human language.
Additional Bindings | Purpose
AllLanguages | Max Binding
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
28. Location.text
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.
Short | Text summary of the resource, for human interpretation
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Narrative
Alternate Names | narrative, html, xhtml, display
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
30. Location.contained
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.
Short | Contained, inline Resources
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.
Control | 0..*
Type | Resource
Alternate Names | inline resources, anonymous resources, contained resources
32. Location.extension
Definition | An Extension
Short | Extension
Control | 2..* This element is affected by the following invariants: ele-1
Type | Extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
34. Location.extension:ror-commune-cog
Slice Name | ror-commune-cog
Definition | Extension créée dans le cadre du ROR pour représenter le code officiel géographique (COG) de la commune dans laquelle le lieu est situé.
Short | communeCog (LieuRealisationOffre) : Code officiel géographique (COG) de la commune dans laquelle le lieu est situé
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORCommuneCog) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Location.extension:ror-location-equipment
Slice Name | ror-location-equipment
Definition | Extension créée dans le cadre du ROR pour décrire une ressource matérielle discriminante pour la réalisation d'une prestation. Cette extension a été créée, car Device ne correspondait pas à la définition de l'équipement pour le ROR. Device représente une instance d'un équipement alors l'équipement pour le ROR correspond juste au nombre d'équipement de même type.
Short | EquipementSpecifique : Ressource matérielle discriminante pour la réalisation d'une prestation
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationEquipment) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Location.extension:ror-location-residential-capacity
Slice Name | ror-location-residential-capacity
Definition | Extension créée dans le cadre du ROR qui décrit un type d'habitation adapté à la réalisation d'une offre.
Short | CapaciteHabitation : type d'habitation adapté à la réalisation d'une offre
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationResidentialCapacity) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
40. Location.extension:ror-location-supported-capacity
Slice Name | ror-location-supported-capacity
Definition | Extension créée dans le cadre du ROR qui indique une série d’enregistrements indiquant la quantité de lit (ou de place) de l'entité pour un statut et une temporalité donnés.
Short | CapacitePriseCharge : + CapaciteAccueilOperationnelle
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension(RORLocationSupportedCapacity) (Complex Extension)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
42. Location.extension:ror-meta-creation-date
Slice Name | ror-meta-creation-date
Definition | Extension créée dans le cadre du ROR qui correspond à la date de création (dans le ROR régional) présente dans les métadonnées.
Short | dateCreation (Metadonnee)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORMetaCreationDate) (Extension Type: dateTime)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Location.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard Status | Normative (from Trial Use)
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
46. Location.identifier
Definition | Unique code or number identifying the location to its users.
Short | Unique code or number identifying the location to its users
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..* This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing | This element introduces a set of slices on `Location.identifier`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ type.coding.code
48. Location.identifier:idExterneSynchro
Slice Name | idExterneSynchro
Definition | Unique code or number identifying the location to its users.
Short | idExterneSynchro (LieuRealisationOffre) : Identifiant défini par le porteur d’offre pour la zone d’hébergement des lits
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
50. Location.identifier:idExterneSynchro.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
52. Location.identifier:idExterneSynchro.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
54. Location.identifier:idExterneSynchro.use
Definition | The purpose of this identifier.
Short | usual | official | temp | secondary | old (If known)
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from IdentifierUse (required to `http://hl7.org/fhir/ValueSet/identifier-use|4.0.1` ) Identifies the purpose for this identifier, if known .
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Location.identifier:idExterneSynchro.type
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Short | Description of identifier
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to `http://hl7.org/fhir/ValueSet/identifier-type` ) A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
Type | CodeableConcept
Must Support | true
Summary | true
Requirements | Allows users to make use of identifiers when the identifier system is not known.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
58. Location.identifier:idExterneSynchro.type.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
60. Location.identifier:idExterneSynchro.type.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.type.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Location.identifier:idExterneSynchro.type.coding
Definition | A reference to a code defined by a terminology system.
Short | Code defined by a terminology system
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Coding
Summary | true
Requirements | Allows for alternative encodings within a code system, and translations to other code systems.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
64. Location.identifier:idExterneSynchro.type.coding.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
66. Location.identifier:idExterneSynchro.type.coding.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.type.coding.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
68. Location.identifier:idExterneSynchro.type.coding.system
Definition | The identification of the code system that defines the meaning of the symbol in the code.
Short | Identity of the terminology system
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to be unambiguous about the source of the definition of the symbol.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
70. Location.identifier:idExterneSynchro.type.coding.version
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Short | Version of the system - if relevant
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Note | This is a business version Id, not a resource version Id (see discussion)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
72. Location.identifier:idExterneSynchro.type.coding.code
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Short | Symbol in syntax defined by the system
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 1..1 This element is affected by the following invariants: ele-1
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to refer to a particular code in the system.
Pattern Value | `26`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
74. Location.identifier:idExterneSynchro.type.coding.display
Definition | A representation of the meaning of the code in the system, following the rules of the system.
Short | Representation defined by the system
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
76. Location.identifier:idExterneSynchro.type.coding.userSelected
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Short | If this coding was chosen directly by the user
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | boolean
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
78. Location.identifier:idExterneSynchro.type.text
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Short | Plain text representation of the concept
Comments | Very often the text is the same as a displayName of one of the codings.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
80. Location.identifier:idExterneSynchro.system
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Short | The namespace for the identifier value
Comments | Identifier.system is always case sensitive.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
82. Location.identifier:idExterneSynchro.value
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Short | The value that is unique
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Example | <br/><b>General</b>:123456
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
84. Location.identifier:idExterneSynchro.period
Definition | Time period during which identifier is/was valid for use.
Short | Time period when id is/was valid for use
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
86. Location.identifier:idExterneSynchro.assigner
Definition | Organization that issued/manages the identifier.
Short | Organization that issued id (may be just text)
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Organization)
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
88. Location.identifier:idLocation
Slice Name | idLocation
Definition | Unique code or number identifying the location to its users.
Short | identifiant (LieuRealisationOffre) : Identifiant fonctionnel du lieu
Note | This is a business identifier, not a resource identifier (see discussion)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Identifier
Must Support | true
Summary | true
Requirements | Organization label locations in registries, need to keep track of those.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
90. Location.identifier:idLocation.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
92. Location.identifier:idLocation.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
94. Location.identifier:idLocation.use
Definition | The purpose of this identifier.
Short | usual | official | temp | secondary | old (If known)
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from IdentifierUse (required to `http://hl7.org/fhir/ValueSet/identifier-use|4.0.1` ) Identifies the purpose for this identifier, if known .
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Location.identifier:idLocation.type
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.
Short | Description of identifier
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
Control | 1..1 This element is affected by the following invariants: ele-1
Binding | Unless not suitable, these codes SHALL be taken from Identifier Type Codes (extensible to `http://hl7.org/fhir/ValueSet/identifier-type` ) A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
Type | CodeableConcept
Must Support | true
Summary | true
Requirements | Allows users to make use of identifiers when the identifier system is not known.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
98. Location.identifier:idLocation.type.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
100. Location.identifier:idLocation.type.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.type.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Location.identifier:idLocation.type.coding
Definition | A reference to a code defined by a terminology system.
Short | Code defined by a terminology system
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Coding
Summary | true
Requirements | Allows for alternative encodings within a code system, and translations to other code systems.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
104. Location.identifier:idLocation.type.coding.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
106. Location.identifier:idLocation.type.coding.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.identifier.type.coding.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
108. Location.identifier:idLocation.type.coding.system
Definition | The identification of the code system that defines the meaning of the symbol in the code.
Short | Identity of the terminology system
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to be unambiguous about the source of the definition of the symbol.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
110. Location.identifier:idLocation.type.coding.version
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.
Short | Version of the system - if relevant
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
Note | This is a business version Id, not a resource version Id (see discussion)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
112. Location.identifier:idLocation.type.coding.code
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).
Short | Symbol in syntax defined by the system
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 1..1 This element is affected by the following invariants: ele-1
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to refer to a particular code in the system.
Pattern Value | `25`
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
114. Location.identifier:idLocation.type.coding.display
Definition | A representation of the meaning of the code in the system, following the rules of the system.
Short | Representation defined by the system
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
116. Location.identifier:idLocation.type.coding.userSelected
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).
Short | If this coding was chosen directly by the user
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | boolean
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
118. Location.identifier:idLocation.type.text
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.
Short | Plain text representation of the concept
Comments | Very often the text is the same as a displayName of one of the codings.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
120. Location.identifier:idLocation.system
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique.
Short | The namespace for the identifier value
Comments | Identifier.system is always case sensitive.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | uri
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.
Example | <br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
122. Location.identifier:idLocation.value
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system.
Short | The value that is unique
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Example | <br/><b>General</b>:123456
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
124. Location.identifier:idLocation.period
Definition | Time period during which identifier is/was valid for use.
Short | Time period when id is/was valid for use
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
126. Location.identifier:idLocation.assigner
Definition | Organization that issued/manages the identifier.
Short | Organization that issued id (may be just text)
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Organization)
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
128. Location.status
Definition | The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.
Short | active | suspended | inactive
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from LocationStatus (required to `http://hl7.org/fhir/ValueSet/location-status|4.0.1` ) Indicates whether the location is still in use.
Type | code
Is Modifier | true because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
130. Location.operationalStatus
Definition | The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.
Short | statut (LieuRealisationOffre) : Indique si le lieu est opérationnel, fermé temporairement ou fermé définitivement
Comments | Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J224_StatutLieu_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J224-StatutLieu-ROR/FHIR/JDV-J224-StatutLieu-ROR` )
Type | Coding
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
132. Location.name
Definition | Name of the location as used by humans. Does not need to be unique.
Short | nom (LieuRealisationOffre) : Nom, exprimé sous la forme de texte, du lieu
Comments | If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
134. Location.alias
Definition | A list of alternate names that the location is known as, or was known as, in the past.
Short | A list of alternate names that the location is known as, or was known as, in the past
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.
Control | 0..* This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing | This element introduces a set of slices on `Location.alias`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
136. Location.alias:nomExterneSynchro
Slice Name | nomExterneSynchro
Definition | A list of alternate names that the location is known as, or was known as, in the past.
Short | A list of alternate names that the location is known as, or was known as, in the past
Comments | There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Requirements | Over time locations and organizations go through many changes and can be known by different names. For searching knowing previous names that the location was known by can be very useful.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
138. Location.description
Definition | Description of the Location, which helps in finding or referencing the place.
Short | description (LieuRealisationOffre) : Description textuelle du lieu, indiquant comment l'atteindre
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Requirements | Humans need additional information to verify a correct location has been identified.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
140. Location.mode
Definition | Indicates whether a resource instance represents a specific location or a class of locations.
Short | instance | kind
Comments | This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from LocationMode (required to `http://hl7.org/fhir/ValueSet/location-mode|4.0.1` ) Indicates whether a resource instance represents a specific location or a class of locations.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
142. Location.type
Definition | Indicates the type of function performed at the location.
Short | fonctionLieu (LieuRealisationOffre) : La fonction correspond à la destination d'usage du lieu
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from JDV_J198_FonctionLieu_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J198-FonctionLieu-ROR/FHIR/JDV-J198-FonctionLieu-ROR` )
Type | CodeableConcept
Must Support | true
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
144. Location.telecom
Definition | The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.
Short | telecommunication (LieuRealisationOffre) : Adresse(s) de télécommunication du lieu
Control | 0..* This element is affected by the following invariants: ele-1
Type | ContactPoint
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) cpt-2: A system is required if a value is provided. (`value.empty() or system.exists()`)
146. Location.telecom.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
148. Location.telecom.extension
Definition | An Extension
Short | Extension
Control | 2..* This element is affected by the following invariants: ele-1
Type | Extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.telecom.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
150. Location.telecom.extension:ror-telecom-communication-channel
Slice Name | ror-telecom-communication-channel
Definition | Extension créée dans le cadre du ROR spécifiant le canal ou la manière dont s'établit la communication
Short | canal (Telecommunication) : Code spécifiant le canal ou la manière dont s'établit la communication
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomCommunicationChannel) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
152. Location.telecom.extension:ror-telecom-usage
Slice Name | ror-telecom-usage
Definition | Extension créée dans le cadre du ROR qui précise l'utilisation du canal de communication
Short | utilisation (Telecommunication) : Utilisation du canal de communication
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomUsage) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
154. Location.telecom.extension:ror-telecom-confidentiality-level
Slice Name | ror-telecom-confidentiality-level
Definition | Extension créée dans le cadre du ROR qui permet de définir le niveau de restriction de l'accès aux attributs de la classe Télécommunication.
Short | niveauConfidentialite (Telecommunication) : Niveau de restriction de l'accès aux attributs de la classe Télécommunication
Control | 1..1 This element is affected by the following invariants: ele-1
Type | Extension(RORTelecomConfidentialityLevel) (Extension Type: CodeableConcept)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
156. Location.telecom.system
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact.
Short | phone | fax | email | pager | url | sms | other
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1, cpt-2
Binding | The codes SHALL be taken from ContactPointSystem (required to `http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1` ) Telecommunications form for contact point.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
158. Location.telecom.value
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).
Short | adresseTelecom (Telecommunication) : Valeur de l'adresse de télécommunication dans le format induit par le canal de communication
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.
Control | 1..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Must Support | true
Summary | true
Requirements | Need to support legacy numbers that are not in a tightly controlled format.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
160. Location.telecom.use
Definition | Identifies the purpose for the contact point.
Short | home | work | temp | old | mobile - purpose of this contact point
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from ContactPointUse (required to `http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1` ) Use of contact point.
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
162. Location.telecom.rank
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.
Short | Specify preferred order of use (1 = highest)
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | positiveInt
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
164. Location.telecom.period
Definition | Time period when the contact point was/is in use.
Short | Time period when the contact point was/is in use
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
166. Location.address
Definition | Physical location.
Short | adresse (LieuRealisationOffre) : Adresse géopostale du lieu
Comments | Additional addresses should be recorded using another instance of the Location resource, or via the Organization.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Address
Requirements | If locations can be visited, we need to keep track of their address.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
168. Location.address.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
170. Location.address.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.address.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
172. Location.address.use
Definition | The purpose of this address.
Short | home | work | temp | old | billing - purpose of this address
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from AddressUse (required to `http://hl7.org/fhir/ValueSet/address-use|4.0.1` ) The use of an address.
Type | code
Is Modifier | true because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | Allows an appropriate address to be chosen from a list of many.
Example | <br/><b>General</b>:home
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
174. Location.address.type
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.
Short | postal | physical | both
Comments | The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from AddressType (required to `http://hl7.org/fhir/ValueSet/address-type|4.0.1` ) The type of an address (physical / postal).
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Example | <br/><b>General</b>:both
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
176. Location.address.text
Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.
Short | Text representation of the address
Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Requirements | A renderable, unencoded form.
Example | <br/><b>General</b>:137 Nowhere Street, Erewhon 9132
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
178. Location.address.line
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.
Short | Street name, number, direction & P.O. Box etc.
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..* This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Example | <br/><b>General</b>:137 Nowhere Street
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
180. Location.address.line.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
182. Location.address.line.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.address.line.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
184. Location.address.line.extension:careOf
Slice Name | careOf
Definition | The name of the party who will take receipt at the specified address, and will take on responsibility for ensuring delivery to the target recipient.
Short | pointRemise (Adresse) : Lieu où le destinataire prend possession de son courrier
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Care Of) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
186. Location.address.line.extension:additionalLocator
Slice Name | additionalLocator
Definition | This can be a unit designator, such as apartment number, suite number, or floor. There may be several unit designators in an address (e.g., "3rd floor, Appt. 342"). This can also be a designator pointing away from the location, rather than specifying a smaller location within some larger one (e.g., Dutch "t.o." means "opposite to" for house boats located across the street facing houses).
Short | complementPointGeographique (Adresse) : Un complément de l'adresse au point géographique
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Additional Locator) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
188. Location.address.line.extension:houseNumber
Slice Name | houseNumber
Definition | The number of a building, house or lot alongside the street. Also known as "primary street number". This does not number the street but rather the building.
Short | numeroVoie (Adresse) : Un numéro dans la voie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP House Number) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
190. Location.address.line.extension:buildingNumberSuffix
Slice Name | buildingNumberSuffix
Definition | Any alphabetic character, fraction or other text that may appear after the numeric portion of a building number.
Short | extension (Adresse) : Extension ou indice de répétition
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Building Number Suffix) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
192. Location.address.line.extension:streetNameType
Slice Name | streetNameType
Definition | The designation given to the street. (e.g. Street, Avenue, Crescent, etc.).
Short | typeVoie (Adresse) : Type de voie
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Street Name Type) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
194. Location.address.line.extension:streetNameType.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1 This element is affected by the following invariants: ele-1
Type | id
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
196. Location.address.line.extension:streetNameType.extension
Definition | An Extension
Short | Extension
Control | 0..0
Type | Extension
Is Modifier | false
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.address.line.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
198. Location.address.line.extension:streetNameType.url
Definition | Source of the definition for the extension code - a logical name or a URL.
Short | identifies the meaning of the extension
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control | 1..1
Type | uri
Is Modifier | false
XML Format | In the XML format, this property is represented as an attribute.
Summary | false
Fixed Value | `http://hl7.org/fhir/StructureDefinition/iso21090-ADXP-streetNameType`
200. Location.address.line.extension:streetNameType.value[x]
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short | Value of extension
Control | 1..1 This element is affected by the following invariants: ext-1
Binding | The codes SHALL be taken from JDV_J219_TypeVoie_ROR (required to `https://mos.esante.gouv.fr/NOS/JDV_J219-TypeVoie-ROR/FHIR/JDV-J219-TypeVoie-ROR` )
Type | string
[x] Note | SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier | false
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | false
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
202. Location.address.line.extension:streetNameBase
Slice Name | streetNameBase
Definition | The base name of a roadway or artery recognized by a municipality (excluding street type and direction).
Short | libelleVoie (Adresse) : Appellation qui est donnée à la voie par les municipalités
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Street Name Base) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
204. Location.address.line.extension:postalBox
Slice Name | postalBox
Definition | A numbered box located in a post station.
Short | mentionDistribution (Adresse) : Mentions particulières de distribution
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(ADXP Post Box) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
206. Location.address.line.extension:lieuDit
Slice Name | lieuDit
Definition | Extension créée dans le cadre du ROR pour indiquer le lieu dit
Short | lieuDit (Adresse) : Lieu qui porte un nom rappelant une particularité topographique ou historique
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(AsLieuDit) (Extension Type: string)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
208. Location.address.line.value
Definition | Primitive value for string
Short | Primitive value for string
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
Max Length: | 1048576
210. Location.address.city
Definition | The name of the city, town, suburb, village or other community or delivery center.
Short | localité (Adresse) : Localité ou Libellé du bureau distributeur CEDEX
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | Municpality
Example | <br/><b>General</b>:Erewhon
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
212. Location.address.district
Definition | The name of the administrative area (county).
Short | District name (aka county)
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | County
Example | <br/><b>General</b>:Madison
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
214. Location.address.state
Definition | Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).
Short | Sub-unit of country (abbreviations ok)
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | Province, Territory
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
216. Location.address.postalCode
Definition | A postal code designating a region defined by the postal service.
Short | codePostal (Adresse) : Code Postal ou code postal spécifique CEDEX
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Alternate Names | Zip
Example | <br/><b>General</b>:9132
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
218. Location.address.country
Definition | Country - a nation as commonly understood or generally accepted.
Short | Country (e.g. can be ISO 3166 2 or 3 letter code)
Comments | ISO 3166 3 letter codes can be used in place of a human readable country name.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Summary | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
220. Location.address.period
Definition | Time period when address was/is in use.
Short | Time period when address was/is in use
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Period
Summary | true
Requirements | Allows addresses to be placed in historical context.
Example | <br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) per-1: If present, start SHALL have a lower value than end (`start.hasValue().not() or end.hasValue().not() or (start <= end)`)
222. Location.physicalType
Definition | Physical form of the location, e.g. building, room, vehicle, road.
Short | Physical form of the location
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
Control | 0..1 This element is affected by the following invariants: ele-1
Binding | For example codes, see LocationType (example to `http://hl7.org/fhir/ValueSet/location-physical-type` ) Physical form of the location.
Type | CodeableConcept
Summary | true
Requirements | For purposes of showing relevant locations in queries, we need to categorize locations.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
224. Location.position
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).
Short | coordonneeGeographique (LieuRealisationOffre) : Coordonnées géographiques du lieu (système géodésique : WGS84)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | BackboneElement
Requirements | For mobile applications and automated route-finding knowing the exact location of the Location is required.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
226. Location.position.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
228. Location.position.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.position.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
230. Location.position.extension:ror-coordinate-reliability
Slice Name | ror-coordinate-reliability
Definition | Extension créée dans le cadre du ROR pour signaler si les informations des coordonnées géographiques sont issues d'un mode de production qui assure un certain niveau de fiabilité
Short | coordonneesFiables (CoordonneeGeographique) : Permet de signaler si les informations des coordonnées géographiques sont issues d'un mode de production qui assure un certain niveau de fiabilité
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Extension(RORCoordinateReliability) (Extension Type: boolean)
Must Support | true
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
232. Location.position.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
234. Location.position.longitude
Definition | Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).
Short | longitude (CoordonneeGeographique) : Une mesure de la distance angulaire est ou ouest depuis le méridien de Greenwich jusqu'au méridien du point spécifique
Comments | Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | decimal
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
236. Location.position.latitude
Definition | Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).
Short | latitude (CoordonneeGeographique) : Une mesure de la distance angulaire nord ou sud depuis l'équateur jusqu'au parallèle du spécifique
Comments | Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)
Control | 1..1 This element is affected by the following invariants: ele-1
Type | decimal
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
238. Location.position.altitude
Definition | Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).
Short | Altitude with WGS84 datum
Comments | Do not use an IEEE type floating point type, instead use something that works like a true decimal, with inbuilt precision (e.g. Java BigInteger)
Control | 0..1 This element is affected by the following invariants: ele-1
Type | decimal
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
240. Location.managingOrganization
Definition | The organization responsible for the provisioning and upkeep of the location.
Short | Organization responsible for provisioning and upkeep
Comments | This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(FrOrganization, ROROrganization)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Summary | true
Requirements | Need to know who manages the location.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
242. Location.partOf
Definition | Another Location of which this Location is physically a part of.
Short | Another Location this one is physically a part of
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..1 This element is affected by the following invariants: ele-1
Type | Reference(Location, RORLocation)
Must Support | true
Must Support Types | No must-support rules about the choice of types/profiles
Requirements | For purposes of location, display and identification, knowing which locations are located within other locations is important.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)
244. Location.hoursOfOperation
Definition | What days/times during a week is this location usually open.
Short | What days/times during a week is this location usually open
Comments | This type of information is commonly found published in directories and on websites informing customers when the facility is available. Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.
Control | 0..* This element is affected by the following invariants: ele-1
Type | BackboneElement
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
246. Location.hoursOfOperation.id
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short | Unique id for inter-element referencing
Control | 0..1
Type | string
XML Format | In the XML format, this property is represented as an attribute.
248. Location.hoursOfOperation.extension
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short | Additional content defined by implementations
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Standard Status | Normative (from Trial Use)
Alternate Names | extensions, user content
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing | This element introduces a set of slices on `Location.hoursOfOperation.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
250. Location.hoursOfOperation.modifierExtension
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short | Extensions that cannot be ignored even if unrecognized
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Extension
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summary | true
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names | extensions, user content, modifiers
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
252. Location.hoursOfOperation.daysOfWeek
Definition | Indicates which days of the week are available between the start and end Times.
Short | mon | tue | wed | thu | fri | sat | sun
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..* This element is affected by the following invariants: ele-1
Binding | The codes SHALL be taken from DaysOfWeek (required to `http://hl7.org/fhir/ValueSet/days-of-week|4.0.1` ) The days of the week.
Type | code
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
254. Location.hoursOfOperation.allDay
Definition | The Location is open all day.
Short | The Location is open all day
Control | 0..1 This element is affected by the following invariants: ele-1
Type | boolean
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
256. Location.hoursOfOperation.openingTime
Definition | Time that the Location opens.
Short | Time that the Location opens
Control | 0..1 This element is affected by the following invariants: ele-1
Type | time
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
258. Location.hoursOfOperation.closingTime
Definition | Time that the Location closes.
Short | Time that the Location closes
Control | 0..1 This element is affected by the following invariants: ele-1
Type | time
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
260. Location.availabilityExceptions
Definition | A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.
Short | Description of availability exceptions
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size
Control | 0..1 This element is affected by the following invariants: ele-1
Type | string
Primitive Value | This primitive element may be present, or absent, or replaced by an extension
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
262. Location.endpoint
Definition | Technical endpoints providing access to services operated for the location.
Short | Technical endpoints providing access to services operated for the location
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository.
Control | 0..* This element is affected by the following invariants: ele-1
Type | Reference(Endpoint)
Requirements | Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.
Invariants | ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ref-1: SHALL have a contained resource if a local reference is provided (`reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))`)