Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social
0.4.0-snapshot-2 - ci-build
Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social - Local Development build (v0.4.0-snapshot-2) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
Draft as of 2024-10-23 |
Definitions for the ror-location-supported-capacity extension.
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Extension créée dans le cadre du ROR qui indique une série d’enregistrements indiquant la quantité de lit (ou de place) de l'entité pour un statut et une temporalité donnés. |
2. Extension.extension | |
Control | 7..? |
4. Extension.extension:capacityType | |
Slice Name | capacityType |
Control | 1..1 |
6. Extension.extension:capacityType.extension | |
Control | 0..0 |
8. Extension.extension:capacityType.url | |
Fixed Value | capacityType |
10. Extension.extension:capacityType.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
12. Extension.extension:capacityStatus | |
Slice Name | capacityStatus |
Control | 1..1 |
14. Extension.extension:capacityStatus.extension | |
Control | 0..0 |
16. Extension.extension:capacityStatus.url | |
Fixed Value | capacityStatus |
18. Extension.extension:capacityStatus.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
20. Extension.extension:temporalityCapacity | |
Slice Name | temporalityCapacity |
Control | 1..1 |
22. Extension.extension:temporalityCapacity.extension | |
Control | 0..0 |
24. Extension.extension:temporalityCapacity.url | |
Fixed Value | temporalityCapacity |
26. Extension.extension:temporalityCapacity.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
28. Extension.extension:nbCapacity | |
Slice Name | nbCapacity |
Control | 1..1 |
30. Extension.extension:nbCapacity.extension | |
Control | 0..0 |
32. Extension.extension:nbCapacity.url | |
Fixed Value | nbCapacity |
34. Extension.extension:nbCapacity.value[x] | |
Type | integer |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
36. Extension.extension:capacitySourceType | |
Slice Name | capacitySourceType |
Control | 1..1 |
38. Extension.extension:capacitySourceType.extension | |
Control | 0..0 |
40. Extension.extension:capacitySourceType.url | |
Fixed Value | capacitySourceType |
42. Extension.extension:capacitySourceType.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
44. Extension.extension:genderCapacityAvailable | |
Slice Name | genderCapacityAvailable |
Control | 0..1 |
46. Extension.extension:genderCapacityAvailable.extension | |
Control | 0..0 |
48. Extension.extension:genderCapacityAvailable.url | |
Fixed Value | genderCapacityAvailable |
50. Extension.extension:genderCapacityAvailable.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
52. Extension.extension:capacityUpdateDate | |
Slice Name | capacityUpdateDate |
Control | 1..1 |
54. Extension.extension:capacityUpdateDate.extension | |
Control | 0..0 |
56. Extension.extension:capacityUpdateDate.url | |
Fixed Value | capacityUpdateDate |
58. Extension.extension:capacityUpdateDate.value[x] | |
Type | dateTime |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
60. Extension.extension:capacityClosingType | |
Slice Name | capacityClosingType |
Control | 0..1 |
62. Extension.extension:capacityClosingType.extension | |
Control | 0..0 |
64. Extension.extension:capacityClosingType.url | |
Fixed Value | capacityClosingType |
66. Extension.extension:capacityClosingType.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
68. Extension.extension:additionalBedType | |
Slice Name | additionalBedType |
Control | 0..1 |
70. Extension.extension:additionalBedType.extension | |
Control | 0..0 |
72. Extension.extension:additionalBedType.url | |
Fixed Value | additionalBedType |
74. Extension.extension:additionalBedType.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
76. Extension.extension:crisisType | |
Slice Name | crisisType |
Control | 0..1 |
78. Extension.extension:crisisType.extension | |
Control | 0..0 |
80. Extension.extension:crisisType.url | |
Fixed Value | crisisType |
82. Extension.extension:crisisType.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
84. Extension.extension:temporaryAssignement | |
Slice Name | temporaryAssignement |
Control | 1..1 |
86. Extension.extension:temporaryAssignement.extension | |
Control | 0..0 |
88. Extension.extension:temporaryAssignement.url | |
Fixed Value | temporaryAssignement |
90. Extension.extension:temporaryAssignement.value[x] | |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
92. Extension.url | |
Fixed Value | https://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-location-supported-capacity |
94. Extension.value[x] | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Extension créée dans le cadre du ROR qui indique une série d’enregistrements indiquant la quantité de lit (ou de place) de l'entité pour un statut et une temporalité donnés. Optional Extension Element - found in all resources. |
Short | ExtensionOptional Extensions Element |
Control | 0..* This element is affected by the following invariants: ele-1 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
2. Extension.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 70..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
4. Extension.extension:capacityType | |
Slice Name | capacityType |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Extension.extension:capacityType.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
8. Extension.extension:capacityType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityType |
10. Extension.extension:capacityType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Extension.extension:capacityStatus | |
Slice Name | capacityStatus |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
14. Extension.extension:capacityStatus.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
16. Extension.extension:capacityStatus.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityStatus |
18. Extension.extension:capacityStatus.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Extension.extension:temporalityCapacity | |
Slice Name | temporalityCapacity |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
22. Extension.extension:temporalityCapacity.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
24. Extension.extension:temporalityCapacity.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | temporalityCapacity |
26. Extension.extension:temporalityCapacity.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Extension.extension:nbCapacity | |
Slice Name | nbCapacity |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
30. Extension.extension:nbCapacity.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
32. Extension.extension:nbCapacity.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | nbCapacity |
34. Extension.extension:nbCapacity.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. Extension.extension:capacitySourceType | |
Slice Name | capacitySourceType |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
38. Extension.extension:capacitySourceType.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
40. Extension.extension:capacitySourceType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacitySourceType |
42. Extension.extension:capacitySourceType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
44. Extension.extension:genderCapacityAvailable | |
Slice Name | genderCapacityAvailable |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
46. Extension.extension:genderCapacityAvailable.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
48. Extension.extension:genderCapacityAvailable.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | genderCapacityAvailable |
50. Extension.extension:genderCapacityAvailable.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
52. Extension.extension:capacityUpdateDate | |
Slice Name | capacityUpdateDate |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
54. Extension.extension:capacityUpdateDate.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
56. Extension.extension:capacityUpdateDate.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityUpdateDate |
58. Extension.extension:capacityUpdateDate.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | dateTime, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
60. Extension.extension:capacityClosingType | |
Slice Name | capacityClosingType |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
62. Extension.extension:capacityClosingType.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
64. Extension.extension:capacityClosingType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityClosingType |
66. Extension.extension:capacityClosingType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
68. Extension.extension:additionalBedType | |
Slice Name | additionalBedType |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
70. Extension.extension:additionalBedType.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
72. Extension.extension:additionalBedType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | additionalBedType |
74. Extension.extension:additionalBedType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
76. Extension.extension:crisisType | |
Slice Name | crisisType |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
78. Extension.extension:crisisType.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
80. Extension.extension:crisisType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | crisisType |
82. Extension.extension:crisisType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
84. Extension.extension:temporaryAssignement | |
Slice Name | temporaryAssignement |
Definition | An Extension |
Short | ExtensionAdditional content defined by implementations |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
86. Extension.extension:temporaryAssignement.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* This element is affected by the following invariants: ele-1 |
Type | Extension |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
88. Extension.extension:temporaryAssignement.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | temporaryAssignement |
90. Extension.extension:temporaryAssignement.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR ) |
Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
92. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | https://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-location-supported-capacity |
94. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..01 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Extension | |
Definition | Extension créée dans le cadre du ROR qui indique une série d’enregistrements indiquant la quantité de lit (ou de place) de l'entité pour un statut et une temporalité donnés. |
Short | Extension |
Control | 0..* This element is affected by the following invariants: ele-1 |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
2. Extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
4. Extension.extension | |
Definition | An Extension |
Short | Extension |
Control | 7..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Extension.extension:capacityType | |
Slice Name | capacityType |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
8. Extension.extension:capacityType.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
10. Extension.extension:capacityType.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
12. Extension.extension:capacityType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityType |
14. Extension.extension:capacityType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J187-NatureCapacite-ROR/FHIR/JDV-J187-NatureCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
16. Extension.extension:capacityStatus | |
Slice Name | capacityStatus |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
18. Extension.extension:capacityStatus.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
20. Extension.extension:capacityStatus.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
22. Extension.extension:capacityStatus.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityStatus |
24. Extension.extension:capacityStatus.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J188-TypeStatutCapacite-ROR/FHIR/JDV-J188-TypeStatutCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
26. Extension.extension:temporalityCapacity | |
Slice Name | temporalityCapacity |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
28. Extension.extension:temporalityCapacity.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
30. Extension.extension:temporalityCapacity.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
32. Extension.extension:temporalityCapacity.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | temporalityCapacity |
34. Extension.extension:temporalityCapacity.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J189-TemporaliteCapacite-ROR/FHIR/JDV-J189-TemporaliteCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
36. Extension.extension:nbCapacity | |
Slice Name | nbCapacity |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
38. Extension.extension:nbCapacity.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
40. Extension.extension:nbCapacity.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
42. Extension.extension:nbCapacity.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | nbCapacity |
44. Extension.extension:nbCapacity.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | integer |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
46. Extension.extension:capacitySourceType | |
Slice Name | capacitySourceType |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
48. Extension.extension:capacitySourceType.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
50. Extension.extension:capacitySourceType.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
52. Extension.extension:capacitySourceType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacitySourceType |
54. Extension.extension:capacitySourceType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J193-TypeSourceCapacite-ROR/FHIR/JDV-J193-TypeSourceCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
56. Extension.extension:genderCapacityAvailable | |
Slice Name | genderCapacityAvailable |
Definition | An Extension |
Short | Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
58. Extension.extension:genderCapacityAvailable.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
60. Extension.extension:genderCapacityAvailable.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
62. Extension.extension:genderCapacityAvailable.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | genderCapacityAvailable |
64. Extension.extension:genderCapacityAvailable.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J190-GenreCapacite-ROR/FHIR/JDV-J190-GenreCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
66. Extension.extension:capacityUpdateDate | |
Slice Name | capacityUpdateDate |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
68. Extension.extension:capacityUpdateDate.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
70. Extension.extension:capacityUpdateDate.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
72. Extension.extension:capacityUpdateDate.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityUpdateDate |
74. Extension.extension:capacityUpdateDate.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | dateTime |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
76. Extension.extension:capacityClosingType | |
Slice Name | capacityClosingType |
Definition | An Extension |
Short | Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
78. Extension.extension:capacityClosingType.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
80. Extension.extension:capacityClosingType.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
82. Extension.extension:capacityClosingType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | capacityClosingType |
84. Extension.extension:capacityClosingType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J191-TypeFermetureCapacite-ROR/FHIR/JDV-J191-TypeFermetureCapacite-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
86. Extension.extension:additionalBedType | |
Slice Name | additionalBedType |
Definition | An Extension |
Short | Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
88. Extension.extension:additionalBedType.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
90. Extension.extension:additionalBedType.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
92. Extension.extension:additionalBedType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | additionalBedType |
94. Extension.extension:additionalBedType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J192-TypeLitSupplementaire-ROR/FHIR/JDV-J192-TypeLitSupplementaire-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
96. Extension.extension:crisisType | |
Slice Name | crisisType |
Definition | An Extension |
Short | Extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
98. Extension.extension:crisisType.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
100. Extension.extension:crisisType.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
102. Extension.extension:crisisType.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | crisisType |
104. Extension.extension:crisisType.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J194-TypeCrise-ROR/FHIR/JDV-J194-TypeCrise-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
106. Extension.extension:temporaryAssignement | |
Slice Name | temporaryAssignement |
Definition | An Extension |
Short | Extension |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
108. Extension.extension:temporaryAssignement.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Short | Unique id for inter-element referencing |
Control | 0..1 |
Type | string |
XML Format | In the XML format, this property is represented as an attribute. |
110. Extension.extension:temporaryAssignement.extension | |
Definition | An Extension |
Short | Extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
Slicing | This element introduces a set of slices on Extension.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
112. Extension.extension:temporaryAssignement.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | temporaryAssignement |
114. Extension.extension:temporaryAssignement.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J195-AffectationTemporaire-ROR/FHIR/JDV-J195-AffectationTemporaire-ROR ) |
Type | CodeableConcept |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |
116. Extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | https://interop.esante.gouv.fr/ig/fhir/ror/StructureDefinition/ror-location-supported-capacity |
118. Extension.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 0..0 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |