Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social
0.4.0-snapshot-2 - ci-build
Répertoire national de l’Offre et des Ressources en santé et accompagnement médico-social - Local Development build (v0.4.0-snapshot-2) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
Draft as of 2024-10-23 |
Definitions for the ror-task resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Task | |
2. Task.identifier | |
Short | Identifiant de l'anomalie |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Must Support | true |
4. Task.partOf | |
Type | Reference(Task, RORTask) |
6. Task.status | |
Must Support | true |
8. Task.businessStatus | |
Short | Statut métier de traitement de l'anomalie |
Control | 1..? |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR ) |
Must Support | true |
10. Task.code | |
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, Exhaustivité |
Control | 1..? |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR ) |
Must Support | true |
12. Task.description | |
Short | Description de l'anomalie |
Must Support | true |
14. Task.focus | |
Short | référence vers la ressources en anomalie |
Control | 1..? |
Must Support | true |
16. Task.executionPeriod | |
18. Task.executionPeriod.start | |
Short | Date d'envoi au destinataire du traitement de l'anomalie |
Must Support | true |
20. Task.executionPeriod.end | |
Short | Date de fin de traitement de l'anomalie par le destinataire |
Must Support | true |
22. Task.authoredOn | |
Short | Date création de l'anomalie |
Control | 1..? |
Must Support | true |
24. Task.lastModified | |
Short | Date de dernière modification |
Control | 1..? |
Must Support | true |
26. Task.requester | |
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
28. Task.owner | |
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
30. Task.location | |
Type | Reference(Location, RORLocation) |
32. Task.reasonCode | |
Short | Type d'action proposée en réponse |
Control | 1..? |
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR ) |
Must Support | true |
34. Task.restriction | |
36. Task.restriction.recipient | |
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole) |
38. Task.input | |
Short | Eléments en entrée pour définir l'anomalie |
Control | 1..? |
Must Support | true |
Slicing | This element introduces a set of slices on Task.input . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
40. Task.input:ruleErrorId | |
Slice Name | ruleErrorId |
Short | Identifiant de la règle à l'origine de l'anomalie |
Control | 0..1 |
Must Support | true |
42. Task.input:ruleErrorId.type | |
Pattern Value | { |
44. Task.input:ruleErrorId.value[x] | |
Type | string |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
46. Task.input:errorValue | |
Slice Name | errorValue |
Short | donnée erronée |
Control | 0..* |
Must Support | true |
48. Task.input:errorValue.type | |
Pattern Value | { |
50. Task.input:proposedValue | |
Slice Name | proposedValue |
Short | nouvelle valeur proposée |
Control | 0..* |
Must Support | true |
52. Task.input:proposedValue.type | |
Pattern Value | { |
54. Task.input:pathElementError | |
Slice Name | pathElementError |
Short | élément en erreur dans la ressource |
Control | 0..1 |
Must Support | true |
56. Task.input:pathElementError.type | |
Pattern Value | { |
58. Task.input:pathElementError.value[x] | |
Type | Expression |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
60. Task.input:systemRequester | |
Slice Name | systemRequester |
Short | système déclarant l'anomalie |
Control | 1..1 |
Must Support | true |
62. Task.input:systemRequester.type | |
Pattern Value | { |
64. Task.input:systemRequester.value[x] | |
Type | string |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
66. Task.input:identifierRequester | |
Slice Name | identifierRequester |
Short | Identifiant du déclarant de l'anomalie |
Control | 0..1 |
Must Support | true |
68. Task.input:identifierRequester.type | |
Pattern Value | { |
70. Task.input:identifierRequester.value[x] | |
Type | Identifier |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
72. Task.output | |
Short | Eléments en sortie concerant le traitement de l'anomalie |
Slicing | This element introduces a set of slices on Task.output . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
74. Task.output:newValue | |
Slice Name | newValue |
Short | Valeur corrigée |
Control | 0..* |
Must Support | true |
76. Task.output:newValue.type | |
Pattern Value | { |
78. Task.output:identifierAnalyst | |
Slice Name | identifierAnalyst |
Short | identifiant du destinataire du traitement de la demande |
Control | 0..1 |
Must Support | true |
80. Task.output:identifierAnalyst.type | |
Pattern Value | { |
82. Task.output:identifierAnalyst.value[x] | |
Type | Identifier |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Guidance on how to interpret the contents of this table can be found here
0. Task | |
Definition | A task to be performed. |
Short | A task to be performed |
Control | 0..* |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) inv-1: Last modified date must be greater than or equal to authored-on date. (lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn) |
2. Task.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Task.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Standard Status | Normative (from Trial Use) |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Task.modifierExtension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. Task.identifier | |
Definition | The business identifier for this task. |
Short | Identifiant de l'anomalieTask Instance Identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Identifier |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
8. Task.partOf | |
Definition | Task that this particular task is part of. |
Short | Composite task |
Comments | This should usually be 0..1. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Reference(Task, RORTask) |
Summary | true |
Requirements | Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task). |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))) |
10. Task.status | |
Definition | The current status of the task. |
Short | draft | requested | received | accepted | + |
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from TaskStatushttp://hl7.org/fhir/ValueSet/task-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/task-status|4.0.1 )The current status of the task. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Task.businessStatus | |
Definition | Contains business-specific nuances of the business state. |
Short | Statut métier de traitement de l'anomalieE.g. "Specimen collected", "IV prepped" |
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For example codes, see https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR ) |
Type | CodeableConcept |
Must Support | true |
Summary | true |
Requirements | There's often a need to track substates of a task - this is often variable by specific workflow implementation. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Task.intent | |
Definition | Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc. |
Short | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option |
Comments | This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances. In most cases, Tasks will have an intent of "order". |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from TaskIntenthttp://hl7.org/fhir/ValueSet/task-intent|4.0.1 (required to http://hl7.org/fhir/ValueSet/task-intent|4.0.1 )Distinguishes whether the task is a proposal, plan or full order. |
Type | code |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Task.code | |
Definition | A name or code (or both) briefly describing what the task involves. |
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, ExhaustivitéTask Type |
Comments | The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code. |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For example codes, see https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-RORhttp://hl7.org/fhir/ValueSet/task-code (required to https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR ) |
Type | CodeableConcept |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Task.description | |
Definition | A free-text description of what is to be performed. |
Short | Description de l'anomalieHuman-readable explanation of task |
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Task.focus | |
Definition | The request being actioned or the resource being manipulated by this task. |
Short | référence vers la ressources en anomalieWhat task is acting on |
Comments | If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.). |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Type | Reference(Resource) |
Must Support | true |
Summary | true |
Requirements | Used to identify the thing to be done. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))) |
22. Task.executionPeriod | |
Definition | Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end). |
Short | Start and end time of execution |
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Period |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) per-1: If present, start SHALL have a lower value than end (start.hasValue().not() or end.hasValue().not() or (start <= end)) |
24. Task.executionPeriod.start | |
Definition | The start of the period. The boundary is inclusive. |
Short | Date d'envoi au destinataire du traitement de l'anomalieStarting time with inclusive boundary |
Comments | If the low element is missing, the meaning is that the low boundary is not known. |
Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. Task.executionPeriod.end | |
Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. |
Short | Date de fin de traitement de l'anomalie par le destinataireEnd time with inclusive boundary, if not ongoing |
Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. |
Control | 0..1 This element is affected by the following invariants: ele-1, per-1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Task.authoredOn | |
Definition | The date and time this task was created. |
Short | Date création de l'anomalieTask Creation Date |
Control | 10..1 This element is affected by the following invariants: ele-1, inv-1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Requirements | Most often used along with lastUpdated to track duration of task to supporting monitoring and management. |
Alternate Names | Created Date |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Task.lastModified | |
Definition | The date and time of last modification to this task. |
Short | Date de dernière modificationTask Last Modified Date |
Control | 10..1 This element is affected by the following invariants: ele-1, inv-1 |
Type | dateTime |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Used along with history to track task activity and time in a particular task state. This enables monitoring and management. |
Alternate Names | Update Date |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
32. Task.requester | |
Definition | The creator of the task. |
Short | Who is asking for task to be done |
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, Device, Organization, Patient, Practitioner, PractitionerRole, RelatedPerson) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | true |
Requirements | Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task). |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))) |
34. Task.owner | |
Definition | Individual organization or Device currently responsible for task execution. |
Short | Responsible individual |
Comments | Tasks may be created with an owner not yet identified. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService, Practitioner, PractitionerRole, Organization, CareTeam, HealthcareService, Patient, Device, RelatedPerson) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | true |
Requirements | Identifies who is expected to perform this task. |
Alternate Names | Performer, Executer |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))) |
36. Task.location | |
Definition | Principal physical location where the this task is performed. |
Short | Where task occurs |
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Reference(Location, RORLocation) |
Summary | true |
Requirements | Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting). |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ref-1: SHALL have a contained resource if a local reference is provided (reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids'))) |
38. Task.reasonCode | |
Definition | A description or code indicating why this task needs to be performed. |
Short | Type d'action proposée en réponseWhy task is needed |
Comments | This should only be included if there is no focus or if it differs from the reason indicated on the focus. |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For example codes, see https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR ) |
Type | CodeableConcept |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. Task.input | |
Definition | Additional information that may be needed in the execution of the task. |
Short | Eléments en entrée pour définir l'anomalieInformation used to perform task |
Control | 10..* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Task.input . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
42. Task.input.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
44. Task.input.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
46. Task.input.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
48. Task.input:ruleErrorId | |
Slice Name | ruleErrorId |
Definition | Additional information that may be needed in the execution of the task. |
Short | Identifiant de la règle à l'origine de l'anomalieInformation used to perform task |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
50. Task.input:ruleErrorId.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
52. Task.input:ruleErrorId.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
54. Task.input:ruleErrorId.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
56. Task.input:errorValue | |
Slice Name | errorValue |
Definition | Additional information that may be needed in the execution of the task. |
Short | donnée erronéeInformation used to perform task |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
58. Task.input:errorValue.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
60. Task.input:errorValue.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
62. Task.input:errorValue.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
64. Task.input:proposedValue | |
Slice Name | proposedValue |
Definition | Additional information that may be needed in the execution of the task. |
Short | nouvelle valeur proposéeInformation used to perform task |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
66. Task.input:proposedValue.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
68. Task.input:proposedValue.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
70. Task.input:proposedValue.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
72. Task.input:pathElementError | |
Slice Name | pathElementError |
Definition | Additional information that may be needed in the execution of the task. |
Short | élément en erreur dans la ressourceInformation used to perform task |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
74. Task.input:pathElementError.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
76. Task.input:pathElementError.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
78. Task.input:pathElementError.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Expression, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
80. Task.input:systemRequester | |
Slice Name | systemRequester |
Definition | Additional information that may be needed in the execution of the task. |
Short | système déclarant l'anomalieInformation used to perform task |
Control | 10..1* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
82. Task.input:systemRequester.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
84. Task.input:systemRequester.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
86. Task.input:systemRequester.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
88. Task.input:identifierRequester | |
Slice Name | identifierRequester |
Definition | Additional information that may be needed in the execution of the task. |
Short | Identifiant du déclarant de l'anomalieInformation used to perform task |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. |
Alternate Names | Supporting Information |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
90. Task.input:identifierRequester.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
92. Task.input:identifierRequester.type | |
Definition | A code or description indicating how the input is intended to be used as part of the task execution. |
Short | Label for the input |
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. |
Type | CodeableConcept |
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
94. Task.input:identifierRequester.value[x] | |
Definition | The value of the input parameter as a basic type. |
Short | Content to use in performing the task |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
96. Task.output | |
Definition | Outputs produced by the Task. |
Short | Eléments en sortie concerant le traitement de l'anomalieInformation produced as part of task |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Task.output . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
98. Task.output.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
100. Task.output.type | |
Definition | The name of the Output parameter. |
Short | Label for output |
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. |
Type | CodeableConcept |
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
102. Task.output.value[x] | |
Definition | The value of the Output parameter as a basic type. |
Short | Result of output |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Requirements | Task outputs can take any form. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
104. Task.output:newValue | |
Slice Name | newValue |
Definition | Outputs produced by the Task. |
Short | Valeur corrigéeInformation produced as part of task |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
106. Task.output:newValue.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
108. Task.output:newValue.type | |
Definition | The name of the Output parameter. |
Short | Label for output |
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. |
Type | CodeableConcept |
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
110. Task.output:newValue.value[x] | |
Definition | The value of the Output parameter as a basic type. |
Short | Result of output |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Requirements | Task outputs can take any form. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
112. Task.output:identifierAnalyst | |
Slice Name | identifierAnalyst |
Definition | Outputs produced by the Task. |
Short | identifiant du destinataire du traitement de la demandeInformation produced as part of task |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | BackboneElement |
Must Support | true |
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
114. Task.output:identifierAnalyst.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
116. Task.output:identifierAnalyst.type | |
Definition | The name of the Output parameter. |
Short | Label for output |
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. |
Type | CodeableConcept |
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. |
Alternate Names | Name |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
118. Task.output:identifierAnalyst.value[x] | |
Definition | The value of the Output parameter as a basic type. |
Short | Result of output |
Control | 1..1 This element is affected by the following invariants: ele-1 |
Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Requirements | Task outputs can take any form. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Task | |||||
Definition | A task to be performed. | ||||
Short | A task to be performed | ||||
Control | 0..* | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )inv-1: Last modified date must be greater than or equal to authored-on date. ( lastModified.exists().not() or authoredOn.exists().not() or lastModified >= authoredOn ) | ||||
2. Task.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Summary | true | ||||
4. Task.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Meta | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Task.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Task.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Task.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Narrative | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. Task.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. Task.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
16. Task.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Standard Status | Normative (from Trial Use) | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.modifierExtension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
18. Task.identifier | |||||
Definition | The business identifier for this task. | ||||
Short | Identifiant de l'anomalie | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. Task.instantiatesCanonical | |||||
Definition | The URL pointing to a FHIR-defined protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task. | ||||
Short | Formal definition of task | ||||
Comments | |||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | canonical(ActivityDefinition) | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Enables a formal definition of how he task is to be performed, enabling automation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Task.instantiatesUri | |||||
Definition | The URL pointing to an externally maintained protocol, guideline, orderset or other definition that is adhered to in whole or in part by this Task. | ||||
Short | Formal definition of task | ||||
Comments | see http://en.wikipedia.org/wiki/Uniform_resource_identifier | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | uri | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Enables a formal definition of how he task is to be performed (e.g. using BPMN, BPEL, XPDL or other formal notation to be associated with a task), enabling automation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. Task.basedOn | |||||
Definition | BasedOn refers to a higher-level authorization that triggered the creation of the task. It references a "request" resource such as a ServiceRequest, MedicationRequest, ServiceRequest, CarePlan, etc. which is distinct from the "request" resource the task is seeking to fulfill. This latter resource is referenced by FocusOn. For example, based on a ServiceRequest (= BasedOn), a task is created to fulfill a procedureRequest ( = FocusOn ) to collect a specimen from a patient. | ||||
Short | Request fulfilled by this task | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Resource) | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
26. Task.groupIdentifier | |||||
Definition | An identifier that links together multiple tasks and other requests that were created in the same context. | ||||
Short | Requisition or grouper id | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier | ||||
Summary | true | ||||
Requirements | Billing and/or reporting can be linked to whether multiple requests were created as a single unit. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. Task.partOf | |||||
Definition | Task that this particular task is part of. | ||||
Short | Composite task | ||||
Comments | This should usually be 0..1. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Task, RORTask) | ||||
Summary | true | ||||
Requirements | Allows tasks to be broken down into sub-steps (and this division can occur independent of the original task). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
30. Task.status | |||||
Definition | The current status of the task. | ||||
Short | draft | requested | received | accepted | + | ||||
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from TaskStatus (required to http://hl7.org/fhir/ValueSet/task-status|4.0.1 )The current status of the task. | ||||
Type | code | ||||
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | These states enable coordination of task status with off-the-shelf workflow solutions that support automation of tasks. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. Task.statusReason | |||||
Definition | An explanation as to why this task is held, failed, was refused, etc. | ||||
Short | Reason for current status | ||||
Comments | This applies to the current status. Look at the history of the task to see reasons for past statuses. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify the reason for current status. These will typically be specific to a particular workflow. | ||||
Type | CodeableConcept | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. Task.businessStatus | |||||
Definition | Contains business-specific nuances of the business state. | ||||
Short | Statut métier de traitement de l'anomalie | ||||
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J244-StatutMetierAnomalie-ROR/FHIR/JDV-J244-StatutMetierAnomalie-ROR ) | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | There's often a need to track substates of a task - this is often variable by specific workflow implementation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Task.intent | |||||
Definition | Indicates the "level" of actionability associated with the Task, i.e. i+R[9]Cs this a proposed task, a planned task, an actionable task, etc. | ||||
Short | unknown | proposal | plan | order | original-order | reflex-order | filler-order | instance-order | option | ||||
Comments | This element is immutable. Proposed tasks, planned tasks, etc. must be distinct instances. In most cases, Tasks will have an intent of "order". | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from TaskIntent (required to http://hl7.org/fhir/ValueSet/task-intent|4.0.1 )Distinguishes whether the task is a proposal, plan or full order. | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Task.priority | |||||
Definition | Indicates how quickly the Task should be addressed with respect to other requests. | ||||
Short | routine | urgent | asap | stat | ||||
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from RequestPriority (required to http://hl7.org/fhir/ValueSet/request-priority|4.0.1 )The task's priority. | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Requirements | Used to identify the service level expected while performing a task. | ||||
Meaning if Missing | If missing, this task should be performed with normal priority | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. Task.code | |||||
Definition | A name or code (or both) briefly describing what the task involves. | ||||
Short | Thématique de l'anomalie exemples :Exactitude, Complétude, Exhaustivité | ||||
Comments | The title (eg "My Tasks", "Outstanding Tasks for Patient X") should go into the code. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J241-ThematiqueAnomalie-ROR/FHIR/JDV-J241-ThematiqueAnomalie-ROR ) | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. Task.description | |||||
Definition | A free-text description of what is to be performed. | ||||
Short | Description de l'anomalie | ||||
Comments | Note that FHIR strings SHALL NOT exceed 1MB in size | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. Task.focus | |||||
Definition | The request being actioned or the resource being manipulated by this task. | ||||
Short | référence vers la ressources en anomalie | ||||
Comments | If multiple resources need to be manipulated, use sub-tasks. (This ensures that status can be tracked independently for each referenced resource.). | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Resource) | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Used to identify the thing to be done. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
46. Task.for | |||||
Definition | The entity who benefits from the performance of the service specified in the task (e.g., the patient). | ||||
Short | Beneficiary of the Task | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Resource) | ||||
Summary | true | ||||
Requirements | Used to track tasks outstanding for a beneficiary. Do not use to track the task owner or creator (see owner and creator respectively). This can also affect access control. | ||||
Alternate Names | Patient | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
48. Task.encounter | |||||
Definition | The healthcare event (e.g. a patient and healthcare provider interaction) during which this task was created. | ||||
Short | Healthcare event during which this task originated | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Encounter) | ||||
Summary | true | ||||
Requirements | For some tasks it may be important to know the link between the encounter the task originated within. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
50. Task.executionPeriod | |||||
Definition | Identifies the time action was first taken against the task (start) and/or the time final action was taken against the task prior to marking it as completed (end). | ||||
Short | Start and end time of execution | ||||
Comments | A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). Period is not used for a duration (a measure of elapsed time). See Duration. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Period | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )per-1: If present, start SHALL have a lower value than end ( start.hasValue().not() or end.hasValue().not() or (start <= end) ) | ||||
52. Task.executionPeriod.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
54. Task.executionPeriod.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.executionPeriod.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
56. Task.executionPeriod.start | |||||
Definition | The start of the period. The boundary is inclusive. | ||||
Short | Date d'envoi au destinataire du traitement de l'anomalie | ||||
Comments | If the low element is missing, the meaning is that the low boundary is not known. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1, per-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. Task.executionPeriod.end | |||||
Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. | ||||
Short | Date de fin de traitement de l'anomalie par le destinataire | ||||
Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1, per-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
60. Task.authoredOn | |||||
Definition | The date and time this task was created. | ||||
Short | Date création de l'anomalie | ||||
Control | 1..1 This element is affected by the following invariants: ele-1, inv-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Requirements | Most often used along with lastUpdated to track duration of task to supporting monitoring and management. | ||||
Alternate Names | Created Date | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. Task.lastModified | |||||
Definition | The date and time of last modification to this task. | ||||
Short | Date de dernière modification | ||||
Control | 1..1 This element is affected by the following invariants: ele-1, inv-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Used along with history to track task activity and time in a particular task state. This enables monitoring and management. | ||||
Alternate Names | Update Date | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. Task.requester | |||||
Definition | The creator of the task. | ||||
Short | Who is asking for task to be done | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole) | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | true | ||||
Requirements | Identifies who created this task. May be used by access control mechanisms (e.g., to ensure that only the creator can cancel a task). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
66. Task.performerType | |||||
Definition | The kind of participant that should perform the task. | ||||
Short | Requested performer | ||||
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHOULD be taken from ProcedurePerformerRoleCodes (preferred to http://hl7.org/fhir/ValueSet/performer-role )The type(s) of task performers allowed. | ||||
Type | CodeableConcept | ||||
Requirements | Use to distinguish tasks on different activity queues. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. Task.owner | |||||
Definition | Individual organization or Device currently responsible for task execution. | ||||
Short | Responsible individual | ||||
Comments | Tasks may be created with an owner not yet identified. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole, RORHealthcareService) | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | true | ||||
Requirements | Identifies who is expected to perform this task. | ||||
Alternate Names | Performer, Executer | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
70. Task.location | |||||
Definition | Principal physical location where the this task is performed. | ||||
Short | Where task occurs | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Location, RORLocation) | ||||
Summary | true | ||||
Requirements | Ties the event to where the records are likely kept and provides context around the event occurrence (e.g. if it occurred inside or outside a dedicated healthcare setting). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
72. Task.reasonCode | |||||
Definition | A description or code indicating why this task needs to be performed. | ||||
Short | Type d'action proposée en réponse | ||||
Comments | This should only be included if there is no focus or if it differs from the reason indicated on the focus. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR (required to https://mos.esante.gouv.fr/NOS/JDV_J242-ActionAnomalie-ROR/FHIR/JDV-J242-ActionAnomalie-ROR ) | ||||
Type | CodeableConcept | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. Task.reasonReference | |||||
Definition | A resource reference indicating why this task needs to be performed. | ||||
Short | Why task is needed | ||||
Comments | Tasks might be justified based on an Observation, a Condition, a past or planned procedure, etc. This should only be included if there is no focus or if it differs from the reason indicated on the focus. Use the CodeableConcept text element in | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Resource) | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
76. Task.insurance | |||||
Definition | Insurance plans, coverage extensions, pre-authorizations and/or pre-determinations that may be relevant to the Task. | ||||
Short | Associated insurance coverage | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Coverage, ClaimResponse) | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
78. Task.note | |||||
Definition | Free-text information captured about the task as it progresses. | ||||
Short | Comments made about the task | ||||
Comments | For systems that do not have structured annotations, they can simply communicate a single annotation with no author or time. This element may need to be included in narrative because of the potential for modifying information. Annotations SHOULD NOT be used to communicate "modifying" information that could be computable. (This is a SHOULD because enforcing user behavior is nearly impossible). | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Annotation | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
80. Task.relevantHistory | |||||
Definition | Links to Provenance records for past versions of this Task that identify key state transitions or updates that are likely to be relevant to a user looking at the current version of the task. | ||||
Short | Key events in history of the Task | ||||
Comments | This element does not point to the Provenance associated with the current version of the resource - as it would be created after this version existed. The Provenance for the current version can be retrieved with a _revinclude. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Reference(Provenance) | ||||
Alternate Names | Status History | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
82. Task.restriction | |||||
Definition | If the Task.focus is a request resource and the task is seeking fulfillment (i.e. is asking for the request to be actioned), this element identifies any limitations on what parts of the referenced request should be actioned. | ||||
Short | Constraints on fulfillment tasks | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Requirements | Sometimes when fulfillment is sought, you don't want full fulfillment. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
84. Task.restriction.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
86. Task.restriction.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.restriction.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
88. Task.restriction.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
90. Task.restriction.repetitions | |||||
Definition | Indicates the number of times the requested action should occur. | ||||
Short | How many times to repeat | ||||
Comments | 32 bit number; for values larger than this, use decimal | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | positiveInt | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Requirements | E.g. order that requests monthly lab tests, fulfillment is sought for 1. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. Task.restriction.period | |||||
Definition | Over what time-period is fulfillment sought. | ||||
Short | When fulfillment sought | ||||
Comments | Note that period.high is the due date representing the time by which the task should be completed. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Period | ||||
Requirements | E.g. order that authorizes 1 year's services. Fulfillment is sought for next 3 months. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )per-1: If present, start SHALL have a lower value than end ( start.hasValue().not() or end.hasValue().not() or (start <= end) ) | ||||
94. Task.restriction.recipient | |||||
Definition | For requests that are targeted to more than on potential recipient/target, for whom is fulfillment sought? | ||||
Short | For whom is fulfillment sought? | ||||
Comments | References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc.). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Reference(ROROrganization, RORPractitioner, RORPractitionerRole) | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ref-1: SHALL have a contained resource if a local reference is provided ( reference.startsWith('#').not() or (reference.substring(1).trace('url') in %rootResource.contained.id.trace('ids')) ) | ||||
96. Task.input | |||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | Eléments en entrée pour définir l'anomalie | ||||
Control | 1..* This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
Slicing | This element introduces a set of slices on Task.input . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
98. Task.input.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
100. Task.input.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
102. Task.input.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
104. Task.input.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
106. Task.input.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. Task.input:ruleErrorId | |||||
Slice Name | ruleErrorId | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | Identifiant de la règle à l'origine de l'anomalie | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
110. Task.input:ruleErrorId.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
112. Task.input:ruleErrorId.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
114. Task.input:ruleErrorId.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
116. Task.input:ruleErrorId.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
118. Task.input:ruleErrorId.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | string | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
120. Task.input:errorValue | |||||
Slice Name | errorValue | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | donnée erronée | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
122. Task.input:errorValue.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
124. Task.input:errorValue.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
126. Task.input:errorValue.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
128. Task.input:errorValue.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
130. Task.input:errorValue.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
132. Task.input:proposedValue | |||||
Slice Name | proposedValue | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | nouvelle valeur proposée | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
134. Task.input:proposedValue.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
136. Task.input:proposedValue.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
138. Task.input:proposedValue.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
140. Task.input:proposedValue.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
142. Task.input:proposedValue.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
144. Task.input:pathElementError | |||||
Slice Name | pathElementError | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | élément en erreur dans la ressource | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
146. Task.input:pathElementError.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
148. Task.input:pathElementError.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
150. Task.input:pathElementError.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
152. Task.input:pathElementError.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
154. Task.input:pathElementError.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Expression | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
156. Task.input:systemRequester | |||||
Slice Name | systemRequester | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | système déclarant l'anomalie | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
158. Task.input:systemRequester.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
160. Task.input:systemRequester.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
162. Task.input:systemRequester.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
164. Task.input:systemRequester.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
166. Task.input:systemRequester.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | string | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
168. Task.input:identifierRequester | |||||
Slice Name | identifierRequester | ||||
Definition | Additional information that may be needed in the execution of the task. | ||||
Short | Identifiant du déclarant de l'anomalie | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data used to perform the task. This data is used in the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Alternate Names | Supporting Information | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
170. Task.input:identifierRequester.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
172. Task.input:identifierRequester.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.input.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
174. Task.input:identifierRequester.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
176. Task.input:identifierRequester.type | |||||
Definition | A code or description indicating how the input is intended to be used as part of the task execution. | ||||
Short | Label for the input | ||||
Comments | If referencing a BPMN workflow or Protocol, the "system" is the URL for the workflow definition and the code is the "name" of the required input. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Comparison source", "Applicable consent", "Concomitent Medications", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Inputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
178. Task.input:identifierRequester.value[x] | |||||
Definition | The value of the input parameter as a basic type. | ||||
Short | Content to use in performing the task | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
180. Task.output | |||||
Definition | Outputs produced by the Task. | ||||
Short | Eléments en sortie concerant le traitement de l'anomalie | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
Slicing | This element introduces a set of slices on Task.output . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
182. Task.output.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
184. Task.output.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.output.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
186. Task.output.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
188. Task.output.type | |||||
Definition | The name of the Output parameter. | ||||
Short | Label for output | ||||
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
190. Task.output.value[x] | |||||
Definition | The value of the Output parameter as a basic type. | ||||
Short | Result of output | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Requirements | Task outputs can take any form. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
192. Task.output:newValue | |||||
Slice Name | newValue | ||||
Definition | Outputs produced by the Task. | ||||
Short | Valeur corrigée | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
194. Task.output:newValue.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
196. Task.output:newValue.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.output.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
198. Task.output:newValue.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
200. Task.output:newValue.type | |||||
Definition | The name of the Output parameter. | ||||
Short | Label for output | ||||
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
202. Task.output:newValue.value[x] | |||||
Definition | The value of the Output parameter as a basic type. | ||||
Short | Result of output | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Requirements | Task outputs can take any form. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
204. Task.output:identifierAnalyst | |||||
Slice Name | identifierAnalyst | ||||
Definition | Outputs produced by the Task. | ||||
Short | identifiant du destinataire du traitement de la demande | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Requirements | Resources and data produced during the execution the task. This data is generated by the business logic of task execution, and is stored separately because it varies between workflows. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
206. Task.output:identifierAnalyst.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
208. Task.output:identifierAnalyst.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Standard Status | Normative (from Trial Use) | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Task.output.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
210. Task.output:identifierAnalyst.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
212. Task.output:identifierAnalyst.type | |||||
Definition | The name of the Output parameter. | ||||
Short | Label for output | ||||
Comments | Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Binding | Codes to identify types of input parameters. These will typically be specific to a particular workflow. E.g. "Identified issues", "Preliminary results", "Filler order", "Final results", etc. | ||||
Type | CodeableConcept | ||||
Requirements | Outputs are named to enable task automation to bind data and pass it from one task to the next. | ||||
Alternate Names | Name | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
214. Task.output:identifierAnalyst.value[x] | |||||
Definition | The value of the Output parameter as a basic type. | ||||
Short | Result of output | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Requirements | Task outputs can take any form. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |