FR Document Core (CDA)
0.1.0 - ci-build
FR Document Core (CDA)
0.1.0 - ci-build
FR Document Core (CDA) - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions
| Draft as of 2026-08-28 |
Definitions for the fr-cda-quantite-de-produit logical model
Guidance on how to interpret the contents of this table can be foundhere
| 0. Supply | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. Base definition for all types defined in FHIR type system. |
| Short | Base for all types and resources |
| Control | 10..1* |
| Is Modifier | false |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| 2. Supply.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 4. Supply.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 6. Supply.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Invariants | II-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists()) |
| 8. Supply.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 10. Supply.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 12. Supply.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 14. Supply.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 16. Supply.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 18. Supply.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 2..2 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Supply.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Supply.templateId:pccAmountOfUnitOfTheConsummable | |
| Slice Name | pccAmountOfUnitOfTheConsummable |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 22. Supply.templateId:pccAmountOfUnitOfTheConsummable.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 24. Supply.templateId:pccAmountOfUnitOfTheConsummable.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 26. Supply.templateId:pccAmountOfUnitOfTheConsummable.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 28. Supply.templateId:pccAmountOfUnitOfTheConsummable.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 1.3.6.1.4.1.19376.1.9.1.3.8 |
| 30. Supply.templateId:pccAmountOfUnitOfTheConsummable.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 32. Supply.templateId:frQuantiteDeProduit | |
| Slice Name | frQuantiteDeProduit |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 34. Supply.templateId:frQuantiteDeProduit.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 36. Supply.templateId:frQuantiteDeProduit.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 38. Supply.templateId:frQuantiteDeProduit.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 40. Supply.templateId:frQuantiteDeProduit.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 1.2.250.1.213.1.1.3.86 |
| 42. Supply.templateId:frQuantiteDeProduit.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 44. Supply.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassSupply (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ActClassSupply|3.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | SPLY |
| Fixed Value | SPLY |
| 46. Supply.moodCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XDocumentSubstanceMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentSubstanceMood|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| XML Format | In the XML format, this property is represented as an attribute. |
| Pattern Value | RQO |
| 48. Supply.id | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 50. Supply.code | |
| Control | 0..1 |
| Binding | For example codes, see ActCode (3.0.0) (example to http://terminology.hl7.org/ValueSet/v3-ActCode|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| 52. Supply.text | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| 54. Supply.statusCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActStatus (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ActStatus|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 56. Supply.effectiveTime | |
| Control | 0..* |
| Type | Choice of: http://hl7.org/cda/stds/core/StructureDefinition/SXCM-TS, http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/EIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/PIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/SXPR-TS |
| Default Type | http://hl7.org/cda/stds/core/StructureDefinition/SXCM-TS|2.0.3-sd |
| XML Format | The type of this property is determined using the xsi:typeattribute. |
| 58. Supply.priorityCode | |
| Control | 0..* |
| Binding | For example codes, see ActPriority (3.0.0) (example to http://terminology.hl7.org/ValueSet/v3-ActPriority|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
| 60. Supply.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-INT |
| 62. Supply.independentInd | |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 64. Supply.independentInd.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 66. Supply.independentInd.value | |
| Definition | The Boolean type stands for the values of two-valued logic. A Boolean value can be either true or false, or, as any other value may be NULL. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Pattern Value | false |
| 68. Supply.quantity | |
| Definition | Quantité de produit |
| Short | Quantité de produit. Si l'élément 'consumable' auquel cette entrée est rattachée contient des informations sur le conditionnement, alors l'élement 'quantity' DOIT contenir la quantité d'emballages primaires du médicament. La valeur se réfère à l'emballage primaire figurant dans l'élément 'pharm:asContent' du médicament. Par exemple, si la valeur est de 2 et que l'élément 'pharm:asContent'; décrit une plaquette contenant 30 comprimés, cela signifie que 2 plaquettes (de 30 comprimés chacune) ont été prescrites. Les emballages inférieures (subContent) ou supérieurs (asSuperContent) ne sont pas concernés. Dans ce cas, l'unité ne doit pas être présente. Si l'élément 'consumable' auquel cette entrée est rattachée ne contient pas d'informations sur le conditionnement, l'élément 'quantity' DOIT contenir la quantité d'unités consommables du médicament. Dans ce cas, l'unité peut être fournie s'il s'agit de quantité non dénombrables. |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/PQ |
| 70. Supply.quantity.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 72. Supply.quantity.unit | |
| Definition | The unit of measure specified in the Unified Code for Units of Measure (UCUM) []. |
| Control | 0..1 |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Unit of Measure |
| Default Value | 1 |
| 74. Supply.quantity.value | |
| Definition | The magnitude of the quantity measured in terms of the unit. |
| Control | 1..1 |
| Type | decimal(real: Real Number) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Maginitude Value |
| 76. Supply.quantity.translation | |
| Definition | An alternative representation of the same physical quantity expressed in a different unit, of a different unit code system and possibly with a different value. |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/PQR |
| Label | Translation |
| 78. Supply.expectedUseTime | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
| 80. Supply.product | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRoot |
| 82. Supply.product.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 84. Supply.product.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 86. Supply.product.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Invariants | II-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists()) |
| 88. Supply.product.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 90. Supply.product.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 92. Supply.product.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 94. Supply.product.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 96. Supply.product.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 98. Supply.product.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 100. Supply.product.typeCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ParticipationTargetDirect (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ParticipationTargetDirect|3.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | PRD |
| 102. Supply.product.manufacturedProduct | |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ManufacturedProduct |
| 104. Supply.subject | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Subject |
| 106. Supply.specimen | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
| 108. Supply.performer | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2 |
| 110. Supply.author | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Author |
| 112. Supply.informant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Informant |
| 114. Supply.participant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
| 116. Supply.entryRelationship | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 118. Supply.reference | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
| 120. Supply.precondition | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition |
| 122. Supply.sdtcInFulfillmentOf1 | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1 |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameinFulfillmentOf1. |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Supply | |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| 2. Supply.templateId | |
| Control | 2..2 |
| Slicing | This element introduces a set of slices on Supply.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Supply.templateId:pccAmountOfUnitOfTheConsummable | |
| Slice Name | pccAmountOfUnitOfTheConsummable |
| Control | 1..1 |
| 6. Supply.templateId:pccAmountOfUnitOfTheConsummable.root | |
| Control | 1..? |
| Pattern Value | 1.3.6.1.4.1.19376.1.9.1.3.8 |
| 8. Supply.templateId:frQuantiteDeProduit | |
| Slice Name | frQuantiteDeProduit |
| Control | 1..1 |
| 10. Supply.templateId:frQuantiteDeProduit.root | |
| Control | 1..? |
| Pattern Value | 1.2.250.1.213.1.1.3.86 |
| 12. Supply.classCode | |
| Must Support | true |
| 14. Supply.moodCode | |
| Must Support | true |
| Pattern Value | RQO |
| 16. Supply.independentInd | |
| Control | 1..? |
| 18. Supply.independentInd.value | |
| Pattern Value | false |
| 20. Supply.quantity | |
| Definition | Quantité de produit |
| Short | Quantité de produit. Si l'élément 'consumable' auquel cette entrée est rattachée contient des informations sur le conditionnement, alors l'élement 'quantity' DOIT contenir la quantité d'emballages primaires du médicament. La valeur se réfère à l'emballage primaire figurant dans l'élément 'pharm:asContent' du médicament. Par exemple, si la valeur est de 2 et que l'élément 'pharm:asContent'; décrit une plaquette contenant 30 comprimés, cela signifie que 2 plaquettes (de 30 comprimés chacune) ont été prescrites. Les emballages inférieures (subContent) ou supérieurs (asSuperContent) ne sont pas concernés. Dans ce cas, l'unité ne doit pas être présente. Si l'élément 'consumable' auquel cette entrée est rattachée ne contient pas d'informations sur le conditionnement, l'élément 'quantity' DOIT contenir la quantité d'unités consommables du médicament. Dans ce cas, l'unité peut être fournie s'il s'agit de quantité non dénombrables. |
| Control | 1..? |
| 22. Supply.quantity.value | |
| Control | 1..? |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Supply | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Is Modifier | false |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| 2. Supply.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 4. Supply.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 6. Supply.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Invariants | II-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists()) |
| 8. Supply.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 10. Supply.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 12. Supply.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 14. Supply.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 16. Supply.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 18. Supply.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 2..2 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Supply.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Supply.templateId:pccAmountOfUnitOfTheConsummable | |
| Slice Name | pccAmountOfUnitOfTheConsummable |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 22. Supply.templateId:pccAmountOfUnitOfTheConsummable.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 24. Supply.templateId:pccAmountOfUnitOfTheConsummable.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 26. Supply.templateId:pccAmountOfUnitOfTheConsummable.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 28. Supply.templateId:pccAmountOfUnitOfTheConsummable.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 1.3.6.1.4.1.19376.1.9.1.3.8 |
| 30. Supply.templateId:pccAmountOfUnitOfTheConsummable.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 32. Supply.templateId:frQuantiteDeProduit | |
| Slice Name | frQuantiteDeProduit |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 34. Supply.templateId:frQuantiteDeProduit.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 36. Supply.templateId:frQuantiteDeProduit.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 38. Supply.templateId:frQuantiteDeProduit.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 40. Supply.templateId:frQuantiteDeProduit.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 1.2.250.1.213.1.1.3.86 |
| 42. Supply.templateId:frQuantiteDeProduit.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 44. Supply.classCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActClassSupply (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ActClassSupply|3.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | SPLY |
| Fixed Value | SPLY |
| 46. Supply.moodCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XDocumentSubstanceMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentSubstanceMood|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Must Support | true |
| XML Format | In the XML format, this property is represented as an attribute. |
| Pattern Value | RQO |
| 48. Supply.id | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 50. Supply.code | |
| Control | 0..1 |
| Binding | For example codes, see ActCode (3.0.0) (example to http://terminology.hl7.org/ValueSet/v3-ActCode|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| 52. Supply.text | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| 54. Supply.statusCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ActStatus (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ActStatus|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 56. Supply.effectiveTime | |
| Control | 0..* |
| Type | Choice of: http://hl7.org/cda/stds/core/StructureDefinition/SXCM-TS, http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/EIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/PIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/SXPR-TS |
| Default Type | http://hl7.org/cda/stds/core/StructureDefinition/SXCM-TS|2.0.3-sd |
| XML Format | The type of this property is determined using the xsi:typeattribute. |
| 58. Supply.priorityCode | |
| Control | 0..* |
| Binding | For example codes, see ActPriority (3.0.0) (example to http://terminology.hl7.org/ValueSet/v3-ActPriority|3.0.0) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
| 60. Supply.repeatNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-INT |
| 62. Supply.independentInd | |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 64. Supply.independentInd.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 66. Supply.independentInd.value | |
| Definition | The Boolean type stands for the values of two-valued logic. A Boolean value can be either true or false, or, as any other value may be NULL. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Pattern Value | false |
| 68. Supply.quantity | |
| Definition | Quantité de produit |
| Short | Quantité de produit. Si l'élément 'consumable' auquel cette entrée est rattachée contient des informations sur le conditionnement, alors l'élement 'quantity' DOIT contenir la quantité d'emballages primaires du médicament. La valeur se réfère à l'emballage primaire figurant dans l'élément 'pharm:asContent' du médicament. Par exemple, si la valeur est de 2 et que l'élément 'pharm:asContent'; décrit une plaquette contenant 30 comprimés, cela signifie que 2 plaquettes (de 30 comprimés chacune) ont été prescrites. Les emballages inférieures (subContent) ou supérieurs (asSuperContent) ne sont pas concernés. Dans ce cas, l'unité ne doit pas être présente. Si l'élément 'consumable' auquel cette entrée est rattachée ne contient pas d'informations sur le conditionnement, l'élément 'quantity' DOIT contenir la quantité d'unités consommables du médicament. Dans ce cas, l'unité peut être fournie s'il s'agit de quantité non dénombrables. |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/PQ |
| 70. Supply.quantity.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 72. Supply.quantity.unit | |
| Definition | The unit of measure specified in the Unified Code for Units of Measure (UCUM) []. |
| Control | 0..1 |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Unit of Measure |
| Default Value | 1 |
| 74. Supply.quantity.value | |
| Definition | The magnitude of the quantity measured in terms of the unit. |
| Control | 1..1 |
| Type | decimal(real: Real Number) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Maginitude Value |
| 76. Supply.quantity.translation | |
| Definition | An alternative representation of the same physical quantity expressed in a different unit, of a different unit code system and possibly with a different value. |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/PQR |
| Label | Translation |
| 78. Supply.expectedUseTime | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
| 80. Supply.product | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRoot |
| 82. Supply.product.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 84. Supply.product.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 86. Supply.product.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Invariants | II-1: An II instance must have either a root or an nullFlavor. (root.exists() or nullFlavor.exists()) |
| 88. Supply.product.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (2.0.3-sd) (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor|2.0.3-sd) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 90. Supply.product.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 92. Supply.product.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 94. Supply.product.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 96. Supply.product.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 98. Supply.product.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 100. Supply.product.typeCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from ParticipationTargetDirect (3.0.0) (required to http://terminology.hl7.org/ValueSet/v3-ParticipationTargetDirect|3.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | PRD |
| 102. Supply.product.manufacturedProduct | |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ManufacturedProduct |
| 104. Supply.subject | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Subject |
| 106. Supply.specimen | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
| 108. Supply.performer | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2 |
| 110. Supply.author | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Author |
| 112. Supply.informant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Informant |
| 114. Supply.participant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
| 116. Supply.entryRelationship | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 118. Supply.reference | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
| 120. Supply.precondition | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition |
| 122. Supply.sdtcInFulfillmentOf1 | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1 |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameinFulfillmentOf1. |